Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Clear acrylic pump top with RGB strip and dual D5 mounting feet

Alphacool

Alphacool Eisdecke D5 Dual Plexi Top 13312

SKU CH-MXM8-5AX7A

A clear acrylic pump top with pre-installed RGB lighting and multiple G1/4 threads for connecting two D5 or DDC pumps in series

  • ColorClear
  • FeaturesQuiet, strong and spectacular! The Alphacool Eisdecke Plexi
  • Quiet operation with acoustic-optimised pump housing
  • Maximum flow capacity supporting D5, DDC, DC-LT and VPP755 pumps
  • Dual-top design enables two pumps in series for higher performance
  • Flexible mounting at 45° or 90° angles with included feet
  • Pre-installed RGB strip with 4-pin connector for synchronised lighting

Alphacool Eisdecke D5 Dual Plexi Top 13312

This pump top fits Alphacool DC-LT, Laing DDC, Eispumpe VPP755 and Laing D5 pumps. It provides multiple 1/4-inch threads for flexible loop routing. A pre-assembled RGB strip connects via a 4-pin male connector. Builders who want to showcase their pump and sync lighting will benefit from the clear acrylic design.

Check your pump model and thread standard

Verify that your existing pump is one of the four listed models before ordering. Ensure your loop uses 1/4-inch fittings to match the top's ports. Confirm your RGB controller has a compatible 4-pin header for the included strip. Systems using different pump types or thread sizes cannot use this top without adapters.

Upgrades a bare pump into a lit.

Replaces a standard pump housing to add RGB illumination, extra 1/4-inch ports and versatile mounting feet for vertical, horizontal, 45° or 90° angles. The dual version allows two pumps in series for higher flow. The jump is worth it when you need more connection options, integrated lighting and flexible placement in one kit.

Kohokohdat

  • Quiet operation with acoustic-optimised pump housing
  • Maximum flow capacity supporting D5, DDC, DC-LT and VPP755 pumps
  • Dual-top design enables two pumps in series for higher performance
  • Flexible mounting at 45° or 90° angles with included feet
  • Pre-installed RGB strip with 4-pin connector for synchronised lighting

Tekniset tiedot

BrandAlphacool
ModelMBVB07MBZKX26
ColorClear
FeaturesQuiet, strong and spectacular! The Alphacool Eisdecke Plexi is the perfect pump top to take your pump to the next stage.

Kysymyksiä tästä tuotteesta

Does the 13312 kit include the pump itself or only the clear acrylic top and mounting feet?

The package supplies the clear acrylic top, a pre-fitted RGB strip, patented flat screw plugs and mounting feet; the DC-LT, DDC, VPP755 or D5 pump must be purchased separately.

Which of the listed pumps — DC-LT, DDC, VPP755 or D5 — is the best match for a dual-pump series loop?

Any of the four supported pumps can be paired in series using the dual attachment; choose the model that fits your case clearance and flow requirements.

What does the 90-degree mounting option mean for tube routing inside the case?

The included feet let you orient the pump vertically, horizontally, at 45° or 90°, giving maximum freedom to route tubes without sharp bends.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.