Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White brass 90 degree rotatable L connector G1/4 threads 18mm diameter 34mm length

Alphacool

Alphacool Eiszapfen L-Connector Rotatable G1/4 White Brass 17485

SKU CH-6R6R-1X4DV

A rotatable 90° G1/4 brass adapter with external and internal threads for tight liquid-cooling loops

  • ColorWhite
  • FeaturesThis 90° angle adapter has a rotatable ¼” external screw thr

Color White

  • Rotatable 90° G1/4 thread simplifies tight routing
  • White brass finish resists flaking for lasting looks
  • 34 mm length fits confined loops easily
  • 38 g brass body adds minimal weight
  • High-flow 90° design keeps coolant moving freely

Alphacool Eiszapfen Rotatable L-Connector G1/4 White

The Alphacool Eiszapfen L-Connector is a brass 90° angle adapter with a rotatable G1/4 external thread on one side and a G1/4 internal thread on the other. It allows custom-loop builders to route tubing in tight spaces while orienting the connection precisely. The white chrome coating is bonded to the brass substrate for durability and a clean aesthetic.

Suited for tight custom loops; not for straight runs

This fitting suits builders assembling custom water-cooling loops where a 90° turn is required in a confined area and rotational alignment matters. It is not intended for installations needing a straight-through coupler or a fixed-angle elbow without rotational adjustment. Buyers seeking a simple straight G1/4 extender should look at a different connector type.

34 mm length defines clearance

The adapter measures 34 mm in overall length with an 18 mm diameter and a 5 mm thread engagement depth. This single dimension determines whether the fitting clears adjacent components such as GPU blocks, radiator ports, or motherboard heatsinks inside the chassis. Verify the available space against the 34 mm length before purchasing.

Kohokohdat

  • Rotatable 90° G1/4 thread simplifies tight routing
  • White brass finish resists flaking for lasting looks
  • 34 mm length fits confined loops easily
  • 38 g brass body adds minimal weight
  • High-flow 90° design keeps coolant moving freely

Tekniset tiedot

BrandAlphacool
ModelMBVB096MHQ71B
ColorWhite
FeaturesThis 90° angle adapter has a rotatable ¼” external screw thread on one side and a ¼” internal thread on the other side. Now available in white!

Tämän mallin muut versiot

1 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What thread size does the 17485 L-connector use for the rotatable outer and inner connections?

Both the rotatable outer thread and the fixed inner thread are G1/4, matching standard water-cooling fittings.

How do you install the rotatable G1/4 outer thread without stripping the 5 mm thread length?

Hand-tighten the outer thread into the component first, then rotate the L-body to the desired angle before securing the inner fitting; avoid over-torquing the short 5 mm thread.

Will the white coating on the brass body need re-finishing after prolonged coolant exposure?

The coating is bonded to the brass substrate to resist flaking and colour loss, so no re-finishing is required under normal use.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.