Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Chrome 90-degree revolvable female-to-female G1/4 liquid-cooling L-fitting

Alphacool

Alphacool G1/4 Revolvable Female-Female L-Connector 90° Chrome 17038

SKU CH-M313-HDRXK

A 90° revolvable G1/4 female-female L-connector with a high-flow bore and durable chrome-plated brass body

  • TypeFittings
  • High-flow inner diameter reduces loop restriction
  • Revolvable G1/4 female threads simplify tube routing
  • Chrome finish bonded to brass prevents peeling
  • 90° L-shape enables tight corner bends
  • Part 17038 matches Alphacool colour series

Chrome 90° Revolvable L-Connector

The Alphacool G1/4 revolvable female-to-female L-connector redirects tubing through a 90-degree angle inside a custom liquid-cooling loop. Its chrome-plated brass body resists peeling and adds a polished accent. The fitting suits builders who want a clean right-angle turn with high-flow internals. Part number 17038 identifies this specific chrome variant.

Builders needing a chrome 90° turn

This fitting serves loops that must change direction at a right angle while keeping a uniform chrome finish. It is not for runs that need a straight pass-through, an angled offset other than 90°, or a male-threaded connection. Systems using a different thread standard or a non-chrome colour scheme should select another model.

G1/4 female threads on both ends

The connector provides two G1/4 inner threads in a revolvable 90° layout, letting you orient the bend without stressing the tubing. Matching the thread size to every other component in the loop is the single specification that decides fitment.

Kohokohdat

  • High-flow inner diameter reduces loop restriction
  • Revolvable G1/4 female threads simplify tube routing
  • Chrome finish bonded to brass prevents peeling
  • 90° L-shape enables tight corner bends
  • Part 17038 matches Alphacool colour series

Tekniset tiedot

TypeFittings

Kysymyksiä tästä tuotteesta

How do I install the G1/4 revolvable L-connector and what step is often missed?

Screw each G1/4 female thread into the matching male ports on your blocks or radiators, then rotate the 90° body to align the tubing run before tightening the lock rings; the step many miss is finalising the angle before securing both sides.

What maintenance will this chrome fitting need over time?

The chromatised surface bonds the chrome layer to the brass body to resist peeling, so only occasional external cleaning with a soft cloth is required; no internal servicing is needed.

What flow restriction appears first when the loop runs continuously?

The high-flow inner diameter keeps restriction minimal, so the practical limit under sustained use is the pump head pressure available to overcome the combined resistance of all fittings and blocks in the loop.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.