Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four clear acrylic tubes, 80 cm each, 13/10 mm diameter

Alphacool

Alphacool HardTube 13/10mm 80cm 4 Pack Plexi Clear

SKU CH-T247-RV54F

Four clear acrylic hardline tubes, each 80 cm long with 13 mm outer and 10 mm inner diameter, for rigid custom water-cooling loops

  • ColorClear
  • FeaturesThe HardTube project becomes a reality. Alphacool takes a co
  • Clear rigid tubing creates a structured loop appearance
  • 13/10 mm acrylic tubes resist kinking without extra angled fittings
  • 80 cm length per piece covers long runs in large cases
  • Four tubes per pack supply a complete hard-line build
  • Sealed HT connectors join straight for leak-free assembly

What the product is

Alphacool HardTube 13/10mm 80cm 4 Pack Plexi Clear supplies four rigid clear tubes for custom water-cooling loops. Each tube measures 80 centimetres with a 13 millimetre outer diameter and 10 millimetre inner diameter. The plexi material creates a clean, structured appearance compared with flexible PVC hose. The pack is intended for builders assembling a hard-line liquid-cooling system.

Who this suits and who it does not

This pack suits enthusiasts who want a rigid tubing aesthetic and have the tools to bend 13/10mm plexi to exact lengths. It also fits loops designed around Alphacool HT connectors for a sealed, straight-fit connection. Builders who prefer flexible tubing, lack a bending tool, or plan to use Monsoon fittings should choose a different solution.

How it fits into a build

The four 80 centimetre tubes provide enough straight stock for multiple runs between components once bent to shape. They connect directly with Alphacool HT fittings without extra angled adapters, simplifying routing inside the case. Using distilled water as coolant is recommended for correct operation. The clear plexi shows fluid flow and colour for visual effect.

Kohokohdat

  • Clear rigid tubing creates a structured loop appearance
  • 13/10 mm acrylic tubes resist kinking without extra angled fittings
  • 80 cm length per piece covers long runs in large cases
  • Four tubes per pack supply a complete hard-line build
  • Sealed HT connectors join straight for leak-free assembly

Tekniset tiedot

BrandAlphacool
Model1011140
ColorClear
FeaturesThe HardTube project becomes a reality. Alphacool takes a completely new way and clearly sets!

Kysymyksiä tästä tuotteesta

What fittings are required to connect the 13/10mm HardTube in my loop?

You need compression fittings sized for 13 mm outer and 10 mm inner diameter; the tubes are not compatible with Monsoon fittings and must be pushed straight into the fitting with firm pressure.

Can I mix these rigid plexi tubes with the soft PVC tubing I already have?

Yes — use the correct 13/10mm fittings for the HardTube and matching barbs or compression fittings for your existing PVC; both tube types share the same G¼ thread on the component side.

How do I verify the loop is sealed after installing the 80 cm HardTube sections?

Fill the loop with distilled water, run the pump at low speed, and inspect every joint for drips; the clear plexi makes any leak immediately visible.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.