Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Steel power supply enclosure, gray finish, 15.5 by 12 by 4.5 inches

ALTRONIX

ALTRONIX AL600ULXD Power Supply 12VDC 24VDC 6A 115/230VAC

SKU CH-060E-67XTQ

Dual-voltage power supply delivers 12 VDC or 24 VDC at 6 A from 115/230 VAC input in a steel enclosure measuring 15.5 in high, 12.00 in wide and 4.50 in deep, and meets UL 294.

  • TypeOther
  • Dual 12V or 24V output for flexible installations
  • 6A continuous current supports multiple devices
  • 115VAC and 230VAC input works worldwide
  • UL294 and UL1481 listed for access-control and fire-alarm compliance
  • Steel enclosure 15.5in high 12.00in wide 4.50in deep fits standard racks

Altronix AL600ULXD Power Supply

The Altronix AL600ULXD is a dual-voltage power supply and charger delivering 12 VDC or 24 VDC at 6 A. It accepts 115 VAC or 230 VAC input at 60 Hz and mounts in a steel enclosure with a grey finish measuring 15.5 in high, 12.00 in wide and 4.50 in deep. The unit carries UL294, UL1481 and CUL listings and ships with battery leads and a cam lock.

Installers needing flexible voltage selection

This unit suits security and access-control installers who need a single power supply that can be set to either 12 VDC or 24 VDC for different devices on the same job. It is not for buyers who require a fixed single-voltage supply, higher current output, or an input frequency other than 60 Hz.

6 A output at 12 VDC or 24 VDC

The deciding specification is the 6 A output current available at either 12 VDC or 24 VDC. Confirm that the connected load does not exceed this rating before selecting the AL600ULXD.

Kohokohdat

  • Dual 12V or 24V output for flexible installations
  • 6A continuous current supports multiple devices
  • 115VAC and 230VAC input works worldwide
  • UL294 and UL1481 listed for access-control and fire-alarm compliance
  • Steel enclosure 15.5in high 12.00in wide 4.50in deep fits standard racks

Tekniset tiedot

TypeOther

Kysymyksiä tästä tuotteesta

How is the AL600ULXD mounted and which wiring step is often missed?

Secure the steel enclosure using its 12.00 in width and 15.5 in height mounting points, connect 115VAC or 230VAC input, then attach the included battery leads to the charger terminals — skipping the battery leads leaves the backup function inactive.

What ongoing maintenance does the AL600ULXD require?

Inspect the battery leads and connected backup batteries every six months; replace batteries when they no longer hold a full charge, and verify the cam lock remains tight on the gray steel enclosure.

What is the first limit reached when the AL600ULXD runs continuously at full load?

The 6 A output current limit at either 12 VDC or 24 VDC is reached first; the supply will not exceed this rating regardless of 115 VAC or 230 VAC input.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.