Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Full-height single-slot graphics card with two DisplayPort connectors

AMD

AMD FirePro W2100 2GB DDR3 graphics card

SKU CH-5FYB-3C590 MPN W2100

Entry-level professional GPU with 2 GB DDR3 memory, dual DisplayPort 1.2 outputs and 26 W power draw

  • Memory TypeGDDR5
  • Drives two 4K displays with 2x DisplayPort 1.2
  • Low 26W power draw keeps system thermals manageable
  • Fits tight builds using a single-slot PCIe 3.0 x16 design
  • 2GB 128-bit DDR3 memory handles professional 2D workloads
  • GCN 1st Gen architecture supports DirectX 11.2 and OpenGL 4.4

Professional Workstation GPU

The AMD FirePro W2100 is an entry-level graphics card built for professional workstations. It targets users who need certified driver stability for 2D design, multi-monitor productivity, and light 3D modelling tasks. The single-slot, full-height form factor fits compact chassis where space and power are limited.

2GB 128-bit DDR3 Frame Buffer

The card provides 2GB of memory across a 128-bit bus using DDR3 technology. This capacity handles dual 4K displays at 4096 x 2160 resolution and typical CAD viewports comfortably. Complex scenes with heavy texture loads or large assemblies will exhaust the frame buffer and reduce viewport responsiveness.

26W TGP Power Envelope

A thermal graphics power of 26W means the board draws all required energy from the PCI Express 3.0 x16 slot. No auxiliary power connector is needed, simplifying deployment in slim or legacy workstations with restricted power budgets. Systems with undersized power supplies can accommodate this card without upgrades.

Kohokohdat

  • Drives two 4K displays with 2x DisplayPort 1.2
  • Low 26W power draw keeps system thermals manageable
  • Fits tight builds using a single-slot PCIe 3.0 x16 design
  • 2GB 128-bit DDR3 memory handles professional 2D workloads
  • GCN 1st Gen architecture supports DirectX 11.2 and OpenGL 4.4

Tekniset tiedot

Memory TypeGDDR5

Kysymyksiä tästä tuotteesta

Will the PCI Express 3.0 x16 interface work on my older motherboard with PCIe 2.0 slots?

The card uses a PCI Express 3.0 x16 interface which is backward compatible with PCIe 2.0 motherboards. It will operate at the lower generation speed while maintaining full functionality.

How can I verify the card is running at the correct 26W power target after installation?

Monitoring software will report a 26W TGP power limit. Under 3D load the core should sustain its rated clocks without throttling, confirming the power delivery is working as specified.

Does the box include the Mini DisplayPort to standard DisplayPort adapters needed for my monitors?

The card provides two DisplayPort 1.2 outputs natively. No adapters are included for other connector types, so separate cables or converters are required for HDMI, DVI or VGA displays.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.