Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 360 mm radiator with three 120 mm ARGB fans and a skeleton-frame pump head

Antec

Antec Skeleton 360 ARGB liquid cooler 360 mm 3 x 120 mm ARGB fans

SKU CH-5EV6-M5FTH MPN Skeleton 360 ARGB

A 360 mm all-in-one liquid cooler with three 120 mm ARGB PWM fans, a copper base plate and hydraulic bearings for Intel and AMD sockets

  • TypeAIO
  • Block CompatibilityAMD Socket AM4 / AMD Socket AM5 / Intel LGA 1155 / Intel LGA
  • Radiator Size360 mm
  • Fan Size3 Fan Slots (120 mm)
  • LED ColorARGB

Class Black

Size 360mm

  • Massive copper base transfers heat efficiently from the CPU
  • Skeleton-frame pump head adds vivid ARGB lighting synced to the motherboard
  • High-density radiator fins and three PWM ARGB fans move air quietly under load
  • Supports Intel LGA 115X/1200/1700/20XX and AMD AM4/AM5 sockets
  • Elastic high-density tubing with hydraulic-bearing fans ensures stable, long-lasting operation

Skeleton-frame pump with ARGB

The Antec Skeleton 360 ARGB is an all-in-one liquid cooler built around a 360 mm radiator and three 120 mm PWM fans. Its exposed pump housing carries addressable RGB lighting that synchronises with motherboard software. The copper cold plate and hydraulic-bearing fans target enthusiasts who want visible illumination alongside broad socket support for current Intel and AMD platforms.

Hydraulic-bearing fans and dense fins

High-density radiator fins increase surface area while the three 120 mm fans run on PWM control to match airflow to load. Hydraulic bearings reduce mechanical noise during long sessions. Elastic high-density tubing resists permeation and keeps the loop sealed without maintenance. The pump runs continuously to move coolant through the copper base at all power levels.

Broad socket list and tidy tubing

Mounting hardware covers Intel LGA 1155, 1156, 1200, 1366, 1700, 1851, 2011, 2011-v3 and 2066 plus AMD AM4 and AM5. The flexible tubing routes cleanly in mid-tower and larger chassis without sharp bends. ARGB headers on the motherboard drive the pump and fan lighting together. Builders needing a smaller radiator or non-ARGB fans should look elsewhere.

Kohokohdat

  • Massive copper base transfers heat efficiently from the CPU
  • Skeleton-frame pump head adds vivid ARGB lighting synced to the motherboard
  • High-density radiator fins and three PWM ARGB fans move air quietly under load
  • Supports Intel LGA 115X/1200/1700/20XX and AMD AM4/AM5 sockets
  • Elastic high-density tubing with hydraulic-bearing fans ensures stable, long-lasting operation

Tekniset tiedot

BrandAntec
Series360
ModelSkeleton 360 ARGB
Part NumberSkeleton 360 ARGB
TypeAIO
Block CompatibilityAMD Socket AM4 / AMD Socket AM5 / Intel LGA 1155 / Intel LGA 1156 / Intel LGA 1200 / Intel LGA 1366 / Intel LGA 1700 / Intel LGA 1851 / Intel LGA 2011 / Intel LGA 2011-v3 / Intel LGA 2066
Radiator Size360 mm
Fan Size3 Fan Slots (120 mm)
LED ColorARGB
Lähetyspaino2.09 kg
Pakkauksen mitat457 × 229 × 140 mm

Tämän mallin muut versiot

2 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I mount the Antec Skeleton 360 ARGB on an Intel LGA 1700 socket, and which step is often missed?

Secure the included LGA 1700 bracket to the pump base, apply thermal paste, then place the cooler and tighten the four thumb-screws in a cross pattern; the step most people skip is removing the protective film from the copper base before installation.

What part of the Antec Skeleton 360 ARGB will need replacement first after long-term use?

The three 120 mm hydraulic-bearing fans are the only moving parts outside the sealed pump; they typically outlast the pump but will eventually require replacement when bearing noise appears.

What thermal limit appears first when the Antec Skeleton 360 ARGB runs at full load for extended periods?

The 360 mm radiator and three PWM fans dissipate heat until coolant temperature stabilises; the first limit reached is the radiator's ability to reject heat into the case airflow, causing coolant temps to plateau.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.