Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green Micro-ATX server board with four SFP28 ports and embedded Xeon D-1749NT

ASRock Rack

ASRock Rack D1749NTD4U-4Q Micro-ATX server motherboard Intel Xeon D-1749NT 4 SFP28 25GbE

SKU CH-DAEJ-SWSB1 MPN D1749NTD4U-4Q

Micro-ATX server board with an integrated Xeon D-1749NT, four DDR4 slots up to 2667 MHz, PCIe 4.0 and 3.0 expansion, dual M.2, and four 25 GbE SFP28 ports

  • CPU TypeIntel Xeon D-1749NT
  • Number of Processor Support1
  • CPU FeaturesThermal Design Power Up to 90W
  • Number of DDR4 Slots4 x 288-pin
  • DDR4 StandardRDIMM: up to 2667 MHz ECC/non-ECC UDIMM: up to 2667 MHz
  • Maximum Memory SupportedMax. DIMM Frequency - RDIMM: up to 2667 MHz - ECC/non-ECC UD
  • Integrated Xeon D-1749NT up to 90W TDP
  • Four 25GbE SFP28 ports for high-speed networking
  • Four DDR4 slots support ECC RDIMM up to 2667MHz
  • PCIe4.0 x16 slot or dual SlimSAS for flexible expansion
  • Dual M.2 slots with PCIe3.0 x4 or SATA 6Gb/s

Micro-ATX Server Board with Xeon D-1749NT

The ASRock Rack D1749NTD4U-4Q is a Micro-ATX server motherboard built around a soldered Intel Xeon D-1749NT processor with a thermal design power of up to 90W. It targets builders who need integrated 25GbE networking and flexible storage in a compact 9.6 x 9.6 inch form factor for dense rack or edge deployments.

Four DDR4 Slots and Lane-Shared Expansion

The board provides four 288-pin DDR4 slots supporting RDIMM and ECC or non-ECC UDIMM at up to 2667 MHz. Expansion centres on a PCIe 4.0 x16 slot that shares lanes with two SlimSAS connectors, plus a PCIe 3.0 x8 slot that shares lanes with two Mini-SAS HD connectors; populating the x16 slot disables the SlimSAS interfaces, and the x8 slot can disable the Mini-SAS HD links by BIOS setting.

Quad SFP28 25GbE Decides Fit

Four onboard SFP28 ports deliver up to 4 x 25Gbps Ethernet, making this board the right choice only for deployments that require high-density 25GbE connectivity without add-in cards; buyers who need more than four 25GbE links or who require RJ45 10GbE instead should look elsewhere.

Kohokohdat

  • Integrated Xeon D-1749NT up to 90W TDP
  • Four 25GbE SFP28 ports for high-speed networking
  • Four DDR4 slots support ECC RDIMM up to 2667MHz
  • PCIe4.0 x16 slot or dual SlimSAS for flexible expansion
  • Dual M.2 slots with PCIe3.0 x4 or SATA 6Gb/s

Tekniset tiedot

BrandAsRock Rack
ModelD1749NTD4U-4Q
CPU TypeIntel Xeon D-1749NT
Number of Processor Support1
CPU FeaturesThermal Design Power Up to 90W
Number of DDR4 Slots4 x 288-pin
DDR4 StandardRDIMM: up to 2667 MHz
ECC/non-ECC UDIMM: up to 2667 MHz
Maximum Memory SupportedMax. DIMM Frequency
- RDIMM: up to 2667 MHz
- ECC/non-ECC UDIMM: up to 2667 MHz
ECC SupportedYes
RegisteredYes
PCI Express 4.0 x16SLOT7*: PCIe4.0 x16 [CPU]
*SLOT7 shares lanes with 2 SlimSAS.
-Slimline1 and Slimline2 will disable when SLOT7 (PCIe4.0 x16) is populated
-Slimline1 will disable when SLOT7 (PCIe4.0 x8) is populated.
PCI Express x8SLOT6*: PCIe3.0 x8 [CPU]
*SLOT6 shares lanes with 2 Mini-SAS HD by BIOS setting
Other Slots2 SlimSAS* (PCIe4.0 x8) [CPU]
*SLOT7 shares lanes with 2 SlimSAS.
-Slimline1 and Slimline2 will disable when SLOT7 (PCIe4.0 x16) is populated
-Slimline1 will disable when SLOT7 (PCIe4.0 x8) is populated
SAS3 Mini-SAS HD*, 4 SATA 7-pin or 1 M2_2, 1 M2_1
*2 Mini-SAS HD shares lanes with SLOT6 by BIOS setting
M.2M2_1 (PCIe3.0 x4 or SATA 6Gb/s); support 22110/2280 form factor [CPU]
M2_2* (PCIe3.0 x4 or SATA 6Gb/s); support 22110/2280 form factor [CPU]
*M2_2 shares lanes with 4 SATA 7-pin; 4 SATA 7-pin will disable when M2_2 is populated
Number of LAN4 SFP28 (25GbE)
LAN Speed25Gbps
Max LAN Speed4 x 25Gbps
Back I/O PortsUID Button/LED: 1 UID button w/ LED
VGA Port: 1 DB15 (VGA)
Serial Port: 1 DB9 (COM)
USB 3.2 Port: 2 Type-A (USB3.2 Gen1)
RJ45: 1 dedicated IPMI
Other network connector: 4 SFP28 (25GbE)
Onboard USBUSB 3.2 (Gen1) Header: 1 header (19-pin, 2 USB3.2 Gen1)
Other ConnectorsPower Connector: 1 Micro-Fit (4-pin, ATX PSU signal) w/ ATX 24-pin adapter cable, 2 ( 8-pin, ATX 12V) support 12V DC-in
Other Power Connectors: 1 (6-pin, SATA power)
Auxiliary Panel Header: 1 (18-pin): chassis intrusion, LAN1/LAN2 activity LED, locate, SMBus
System Panel: 1 (9-pin): power switch, reset switch, system power LED, HDD activity LED
VGA header: 1 (15-pin)
Fan Header: 1 (4-pin, CPU fan), 5 (6-pin, SYS fans)
TPM Header: 1 (17-pin, LPC), 1 (13-pin, SPI)
VROC header: 1
SGPIO Header: 1
HSBP: 1
SMBus header: 1
PMBus header: 1
IPMB Header: 1
Clear CMOS: 1
NMI Header: 1
Form FactorMicro ATX
Dimensions (W x L)9.6" x 9.6"
Lähetyspaino1.81 kg
Pakkauksen mitat229 × 229 × 51 mm

Kysymyksiä tästä tuotteesta

Will the four 25GbE SFP28 ports share bandwidth with an older PCIe 3.0 x8 add-in card I keep?

SLOT6 runs at PCIe 3.0 x8 and shares lanes with the two Mini-SAS HD connectors by BIOS setting; the four SFP28 ports are separate so they keep full 25Gbps each regardless of what you install in SLOT6.

How do I confirm the Xeon D-1749NT is running at its 90W TDP after assembly?

Watch the IPMI sensor readings or BIOS hardware monitor — they report real-time CPU package power so you can verify the processor settles at or below 90W under load.

Which cables and drives must I source separately for the three Mini-SAS HD and four SATA 7-pin connectors?

The board supplies the Mini-SAS HD and SATA 7-pin headers only; you need Mini-SAS HD to SATA breakout cables or backplanes for the three SAS ports and standard SATA data cables for the four 7-pin ports.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.