NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
ASUS
An AMD 970 chipset ATX board with AM3 socket, four DDR3 slots for up to 32 GB, dual PCI Express x16, 7.1 audio and USB 3.1 Type-A
The ASUS 970 PRO GAMING/AURA is an ATX desktop motherboard built on the AMD 970 chipset for Socket AM3+ processors. It supports AMD FX, Phenom II, Athlon II and Sempron 100 Series CPUs. The board provides four DDR3 memory slots with a maximum capacity of 32 GB and dual-channel operation up to 2133.
The motherboard includes two PCI Express x16 slots enabling NVIDIA SLI and AMD CrossFireX configurations for multi-GPU builds. Onboard Intel Gigabit Ethernet with LANGuard and GameFirst technology manages network traffic. SupremeFX audio delivers 7.1-channel output alongside Sonic Radar II for positional sound cues. USB 3.1 Type-A and an M.2 slot provide high-speed peripheral and storage connections.
Dual-channel DDR3 support up to 2133 determines the memory bandwidth available to the CPU and integrated graphics. Builders using existing DDR3 kits must verify their modules match this speed rating to achieve rated performance. The 32 GB ceiling across four slots sets the total system memory limit for this platform.
| Brand | ASUS |
|---|---|
| Series | 970 |
| Model | 970 |
| CPU Socket Type | AM3 |
| CPU Type | Phenom II |
| Number of Memory Slots | 4 |
| Maximum Memory Supported | 32GB |
| PCI Express x16 | 2 |
| Audio Channels | 7.1 |
| LAN Chipset | 970 |
| Form Factor | ATX |
The board follows the ATX form factor, so it fits any case that supports ATX motherboards and provides the standard nine mounting holes and I/O shield cut-out.
Install the AM3+ processor first, lock the lever, then insert DDR3 modules into the four slots; the common mistake is populating memory before the CPU cooler is mounted.
The onboard button-cell battery that keeps BIOS settings and the electrolytic capacitors near the CPU socket are the parts most likely to require replacement over time.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?