Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black mid-tower case with tempered glass side panel and column-free interior

ASUS

ASUS Neptune A32 Column-Free Seaview PC Case Black

SKU CH-2BHA-2M5WT

A column-free tempered-glass chassis fits ATX, Micro-ATX or Mini-ITX boards, takes a 420 mm graphics card and 165 mm CPU cooler, and offers 90 mm of rear cable space

  • Motherboard CompatibilityATX Micro-ATX Mini-ITX
  • ColorBlack
  • Case MaterialSteel, tempered glass, plastic
  • With Power SupplyNo
  • Front Ports2×USB 3.0 (5 Gbps) 1×Headset combo jack
  • Column-free seaview design showcases components through tempered glass
  • Supports ATX, Micro-ATX and Mini-ITX motherboards for flexible builds
  • 90 mm rear cable routing space keeps interior tidy
  • Fits graphics cards up to 420 mm and CPU coolers up to 165 mm
  • 2× USB 3.0 (5 Gbps) and headset jack on front panel

Column-Free Seaview Design

The ASUS Neptune A32 is a mid-tower chassis built around a column-free seaview layout that removes the traditional vertical pillar for an unobstructed view of internal components. It accepts ATX, Micro-ATX and Mini-ITX motherboards and is finished in black with steel, tempered glass and plastic construction.

Removable Drive Trays And Mortise-And-Tenon Frame

Removable hard drive trays allow the 3.5 and 2.5 inch bays to be configured as 2+0, 1+1 or 0+2 depending on storage needs. The easy-to-disassemble mortise-and-tenon frame lets panels separate without tools, simplifying hardware swaps and deep cleaning.

Tool-Free Panels And Magnetic Dust Filters

Tool-free side panels and the mortise-and-tenon structure make assembly straightforward, while magnetic dust filters on the right side and bottom detach quickly for maintenance. Builders should verify that their graphics card does not exceed 420 mm, the CPU cooler stays within 165 mm and the power supply fits the 220 mm limit before purchasing.

Kohokohdat

  • Column-free seaview design showcases components through tempered glass
  • Supports ATX, Micro-ATX and Mini-ITX motherboards for flexible builds
  • 90 mm rear cable routing space keeps interior tidy
  • Fits graphics cards up to 420 mm and CPU coolers up to 165 mm
  • 2× USB 3.0 (5 Gbps) and headset jack on front panel

Tekniset tiedot

Motherboard CompatibilityATX
Micro-ATX
Mini-ITX
ColorBlack
Case MaterialSteel, tempered glass, plastic
With Power SupplyNo
Front Ports2×USB 3.0 (5 Gbps)
1×Headset combo jack
BrandASUS

Kysymyksiä tästä tuotteesta

How often will the 2 magnetic side and 1 magnetic bottom dust filters need cleaning under sustained use?

The 2 magnetic side filters and 1 magnetic bottom filter are removable for washing; cleaning frequency depends on ambient dust but they are the only filters fitted.

Which dimension limits a long graphics card first when the 420 mm GPU clearance is fully used?

The 420 mm maximum GPU length is the hard limit; cards longer than that cannot be installed regardless of other clearances.

How much heat can the case move when all 10×12 cm fan mounts are populated and running all day?

The case supports up to 10×120 mm fans across top, front, rear and PSU compartment; actual airflow depends on the fans you choose and their speed curves.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.