Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

ASUS

ASUS Neptune A32 Type-C Edition White PC case

SKU CH-5307-DRPJD

White ATX mid-tower with tempered glass, 10 x 12 cm fan mounts, 360 mm radiator support, front USB 3.2 Gen 2 Type-C and 90 mm cable routing

  • Motherboard CompatibilityATX Micro-ATX Mini-ITX
  • ColorWhite
  • Case MaterialSteel, tempered glass, plastic
  • With Power SupplyNo
  • Front Ports1 x Headphones / Microphone 2 x USB 3.2 Gen 2x2 Type-C 4 x U
  • Fits ATX, Micro-ATX and Mini-ITX boards with 7 PCIe slots
  • Front panel gives 10 Gbps Type-C plus four 5 Gbps ports
  • Top, bottom and rear mounts accept 360 mm radiators
  • Steel frame with tempered glass and 90 mm cable routing space
  • Two magnetic side filters and one bottom filter keep dust out

White column-free ocean-view chassis

The ASUS Neptune A32 Type-C Edition White is a mid-tower case for ATX, Micro-ATX and Mini-ITX motherboards. Its steel and tempered glass construction creates an open interior with no central column. Builders who want a clean white aesthetic and panoramic component visibility will appreciate the layout. Buyers who need more than seven expansion slots or a built-in power supply should look elsewhere.

Front I/O limited to one 10 Gbps Type-C

The case provides a single USB 3.2 Gen 2 Type-C connection rated at 10 Gbps alongside two USB 3.0 ports and a headset combo jack. No faster or additional front-panel interfaces are present. Radiator support tops out at 360 mm in the top, bottom and rear positions. GPU length is capped at 420 mm and CPU cooler height at 165 mm. Power supplies longer than 220 mm will not fit.

Magnetic dust filters

Two magnetic filters on the right side and one on the bottom pull out for cleaning without tools. The 90 mm rear cable management space gives room to route wires behind the motherboard tray. Pre-drilled mounts accept up to ten 120 mm fans in top, front, rear and PSU-compartment locations. Installers should verify GPU and cooler dimensions against the stated limits before purchase.

Kohokohdat

  • Fits ATX, Micro-ATX and Mini-ITX boards with 7 PCIe slots
  • Front panel gives 10 Gbps Type-C plus four 5 Gbps ports
  • Top, bottom and rear mounts accept 360 mm radiators
  • Steel frame with tempered glass and 90 mm cable routing space
  • Two magnetic side filters and one bottom filter keep dust out

Tekniset tiedot

Motherboard CompatibilityATX
Micro-ATX
Mini-ITX
ColorWhite
Case MaterialSteel, tempered glass, plastic
With Power SupplyNo
Front Ports1 x Headphones / Microphone
2 x USB 3.2 Gen 2x2 Type-C
4 x USB 3.2 Gen 1
BrandASUS

Kysymyksiä tästä tuotteesta

Which white variant of the Neptune A32 Type-C Edition should I pick if I need maximum 3.5-inch drive bays?

Choose the configuration listed as 2+0 to install two 3.5-inch drives and no 2.5-inch drives in the dedicated bays.

What does the 420 mm GPU length limit mean when I install a graphics card?

Any card up to 420 mm long will fit; longer cards will hit the front panel or PSU shroud and cannot be mounted.

How fast is the front USB 3.2 Gen 2 Type-C port in real use?

It runs at 10 Gbps, so large file transfers hit roughly 1 GB/s with a compatible drive and cable.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.