Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Mid-tower PC case in walnut brown finish with tempered glass side panel and large front fans

ASUS

ASUS ProArt PA602 Walnut Edition Mid-Tower PC Case

SKU CH-7QKS-GDZRQ

A mid-tower chassis supporting EATX boards up to 12 by 10.9 inches, 420 mm top radiators, 440 mm graphics cards and eight drive bays, with two 200 mm and one 140 mm fans pre-installed.

  • Supports 420 mm top radiators for high-capacity liquid cooling
  • Three pre-installed fans including two 200 mm front and one 140 mm rear PWM
  • Eight expansion slots plus two vertical for flexible GPU mounting
  • Tempered glass left panel showcases internal build with clean aesthetics
  • Removable dust filters on bottom, top and front simplify maintenance

ProArt PA602 Walnut mid-tower overview

The ProArt PA602 Walnut Edition is a mid-tower chassis designed for creators and workstation builders who need generous internal space. It accepts Mini-ITX, Micro-ATX, ATX and EATX boards up to 12 by 10.9 inches. A left-side tempered glass panel displays the build while walnut accents give the exterior a distinctive finish.

Storage capacity and cooling headroom

Eight drive bays combine four 2.5/3.5 combo slots with four dedicated 2.5-inch positions, providing room for multiple high-capacity drives. Top-mounted radiator support reaches 420 mm, while the front accepts two 200 mm fans and the top fits three 140 mm or 120 mm units. A 140 mm rear fan is pre-installed alongside the two front 200 mm fans. CPU cooler clearance stops at 185 mm, and graphics cards longer than 440 mm will not fit.

Front-panel I/O and cable routing limits

The front panel supplies two USB 2.0 ports, two USB 3.2 Gen 1 ports and one USB 3.2 Gen 2x2 Type-C connector plus a reset button. Rear cable management depth is 30 mm, which restricts how thick a cable bundle can be behind the motherboard tray. Power supplies longer than 190 mm cannot be installed. Removable dust filters cover the bottom, top and front intakes for easier maintenance.

Kohokohdat

  • Supports 420 mm top radiators for high-capacity liquid cooling
  • Three pre-installed fans including two 200 mm front and one 140 mm rear PWM
  • Eight expansion slots plus two vertical for flexible GPU mounting
  • Tempered glass left panel showcases internal build with clean aesthetics
  • Removable dust filters on bottom, top and front simplify maintenance

Tekniset tiedot

BrandASUS

Kysymyksiä tästä tuotteesta

Will my existing EATX board that measures 12 by 10.9 inches fit in this case?

Yes, the case supports EATX motherboards up to 12x10.9 inches alongside ATX, Micro-ATX and Mini-ITX.

How can I verify the pre-installed fans are running correctly after I build the system?

The rear 140 mm fan uses PWM control, so its speed will appear in BIOS or fan software; the two front 200 mm fans spin whenever the system is powered.

Which drives and fans come in the box and what must I purchase separately?

The case includes two 200 mm front fans and one 140 mm rear PWM fan; you still need to supply any 2.5 or 3.5 inch drives and any additional fans for the top or rear mounts.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.