BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
ASUS
AM4 ATX motherboard supports 128 GB DDR4 and Ryzen 2nd and 3rd Gen CPUs
The ASUS ROG Crosshair VIII Dark Hero is an ATX motherboard built for AMD Socket AM4 processors. It accepts second and third generation Ryzen CPUs without a BIOS update, offering four DDR4 slots for up to 128 GB of memory. The board provides one PCI Express 3.0 x16 slot and a single PCI slot for expansion.
This board replaces motherboards that only support first generation Ryzen processors such as the 1300, 1400, 1500, 1600 or 1700 series, which are not compatible even with a BIOS update. The jump is worthwhile when moving to a 2200G, 2600, 3600, 3700X, 3900X or 3950X CPU for higher core counts and newer architecture.
The single graphics slot runs at PCI Express 3.0 speeds, so newer GPUs that benefit from PCI Express 4.0 will operate at the lower bandwidth. Rear I/O includes one USB 3.1 Gen 2 Type-A port and one RJ45 LAN connection, limiting high-speed peripheral and network expansion without add-in cards.
| Brand | ASUS |
|---|---|
| Series | ROG |
| Model | ROG CROSSHAIR VIII DARK HERO |
| CPU Socket Type | AM4 |
| Number of Memory Slots | DDR4 |
| Maximum Memory Supported | 128GB |
| PCI Express 3.0 x16 | 1x PCI Express 3.0 x16 |
| PCI Express x16 | 1 |
| PCI Slots | 1 x PCI Slot |
| Back I/O Ports | 1 x LAN (RJ45) / 1 x USB 3.1 Gen 2 Type-A |
| RJ45 | 1 x RJ45 |
| USB 3.1 | 1 x USB 3.1 |
| Form Factor | ATX |
The board fits a standard ATX chassis and uses the AM4 socket mounting pattern; ensure your case has the ATX standoff layout and the CPU cooler matches AM4 retention holes.
Mount the supplied I/O shield first, then lower the board onto ATX standoffs and secure it with screws; the step often missed is forgetting the shield before the board is fixed in place.
Four DDR4 slots support up to 128 GB total; add matching DDR4 modules in pairs for best stability.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?