Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 server memory module with gold contacts

Axiom

Axiom AX31600R11W/8L 8GB DDR3 1600 ECC Registered server RAM

SKU CH-TDV8-2NXQP MPN AX31600R11W/8L

8 GB DDR3 1600 registered ECC server module with CL11 latency and 1.35 V operation

  • Capacity8GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • ECC protects data integrity with registered buffering
  • DDR3 1600 speed delivers 12800 MB/s bandwidth
  • CL11 latency balances timing and stability
  • 35 V operation reduces power draw per module
  • 240-pin DDR3 form factor fits registered DIMM slots

Axiom 8GB DDR3 1600 Server Module

This 8GB DDR3 module runs at 1600 MHz with PC3 12800 bandwidth and CL11 latency. It operates at 1.35V and uses a 240-pin form factor. Error-correcting code and registered buffering are built in for data integrity. It is designed for compatible server platforms that require ECC registered memory.

Suited for ECC Registered DDR3 Servers

This module fits servers and workstations that specifically call for DDR3 1600 ECC registered DIMMs. It is not for systems that need unbuffered or non-ECC memory. Builders requiring higher capacities per slot or a different DDR generation should look elsewhere. Compatibility must be verified against the system vendor's qualified vendor list.

8GB Capacity for Standard Server Loads

The 8GB density handles typical virtualisation hosts, database nodes and file-serving workloads within a single DIMM slot. Headroom shrinks when running many concurrent virtual machines or large in-memory datasets. Systems needing more memory per channel will require higher-density modules or additional populated slots. Maximum supported memory per system depends on the platform.

Kohokohdat

  • ECC protects data integrity with registered buffering
  • DDR3 1600 speed delivers 12800 MB/s bandwidth
  • CL11 latency balances timing and stability
  • 35 V operation reduces power draw per module
  • 240-pin DDR3 form factor fits registered DIMM slots

Tekniset tiedot

BrandAxiom
ModelAX31600R11W/8L
Capacity8GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Lähetyspaino0.09 kg
Pakkauksen mitat178 × 76 × 25 mm

Kysymyksiä tästä tuotteesta

What motherboard slot and voltage does the AX31600R11W/8L require?

The module fits a 240-pin DDR3 DIMM socket and runs at 1.35 V, so the board must support DDR3 registered memory at that voltage.

Can I mix this CL11 1600 MHz registered ECC stick with older DDR3 modules that have different timings?

Mixing is possible only if the other modules are also registered ECC DDR3; the system will run all sticks at the slowest common speed and highest latency.

How can I verify the AX31600R11W/8L is recognised as 8 GB ECC registered memory after installation?

Check the BIOS memory summary or run a tool such as dmidecode; it should report 8 GB, DDR3-1600, CL11, registered and ECC enabled.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.