Axiom
Axiom SSDEV10LC480-AX enterprise SSD 480 GB 3.5" SATA 256-bit encrypted
Encrypted 480 GB enterprise SSD with 256-bit AES, 500 MB/s read and 440 MB/s write over SATA 6Gb/s, hot-swappable 3.5-inch form factor
- Hardware encryption protects data with 256-bit AES
- Hot-swap support allows drive replacement without downtime
- 480 GB capacity stores critical enterprise workloads
- Sequential read speed reaches 500 MB/s over SATA
- Sequential write speed sustains 440 MB/s for consistent throughput
480 GB encrypted enterprise SSD
The Axiom SSDEV10LC480-AX is a 480 GB enterprise solid-state drive with 256-bit AES encryption. It uses a SATA 6 Gb/s interface in a 3.5 inch form factor that supports hot-swap installation. The drive delivers sequential reads up to 500 MB/s and writes up to 440 MB/s. It carries RoHS certification and a five-year limited warranty.
Suited for secure SATA storage arrays
This drive fits servers and storage arrays that require hardware encryption on a standard SATA interface. The 3.5 inch hot-swap form factor simplifies maintenance in compatible bays. Environments that need faster throughput, lower latency or a different physical size should consider other drive types.
256-bit AES encryption decides fit
Hardware-based 256-bit AES encryption is the defining feature for data-at-rest security requirements. If your deployment mandates encrypted drives on a SATA 6 Gb/s backbone, this model meets that specification. If encryption is not required, a non-encrypted drive may offer better value.
Kohokohdat
- Hardware encryption protects data with 256-bit AES
- Hot-swap support allows drive replacement without downtime
- 480 GB capacity stores critical enterprise workloads
- Sequential read speed reaches 500 MB/s over SATA
- Sequential write speed sustains 440 MB/s for consistent throughput
Tekniset tiedot
Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.
Kysymyksiä tästä tuotteesta
Does my server need a 3.5-inch hot-swap bay and a SATA 6 Gb/s backplane to use this 480 GB drive?
Yes, the drive fits a 3.5-inch hot-swap tray and connects through a SATA 600 interface, so the chassis must provide both the physical bay and the matching backplane.
Can this 256-bit AES encrypted SSD share a SATA backplane with older 3 Gb/s drives?
The drive negotiates down to SATA 3 Gb/s automatically, so it will operate alongside legacy drives on the same backplane at the slower link speed.
How can I verify the 500 MB/s read and 440 MB/s write performance after installation?
Run a sequential benchmark tool such as CrystalDiskMark or fio against the drive; sustained results near 500 MB/s read and 440 MB/s write confirm the SSD is performing to specification.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
