Axiom
Axiom SSDEV20HB240-AX 240 GB 2.5" SATA enterprise SSD
2.5-inch SATA enterprise SSD with 32-layer V-NAND delivering 99K read and 18K write IOPS at 1.4 DWPD
- Read-intensive design optimised for data centres
- 4 DWPD endurance rating supports continuous operation
- 32-layer V-NAND technology enhances reliability
- 99K read IOPS delivers low-latency throughput
- Hot-swap 2.5" SATA form factor fits existing infrastructure
Enterprise SSD for Latency-Sensitive Workloads
The Axiom SSDEV20HB240-AX is a 240 GB 2.5 inch SATA enterprise drive built with 32 layer V-NAND. It targets data centres running latency-sensitive applications and mixed-use workloads that demand 24/7 accessibility. The Sata interface allows capacity expansion within existing IT infrastructure.
Suited for Read-Intensive Mixed Use.
This drive suits enterprises needing consistent IOPS, low I/O latency and high throughput for converged or virtualized architectures. It offers enhanced endurance at 1.4 Drive Writes Per Day. Buyers requiring higher sustained write IOPS beyond 18K or greater total capacity should evaluate other options.
240 GB Capacity with 99K Read IOPS Headroom
The 240 GB drive delivers sustained read IOPS up to 99K and write IOPS up to 18K, handling read-intensive tasks comfortably. Enterprise-grade power-loss protection and end-to-end data protection maintain integrity during unexpected events. Write-heavy workloads exceeding the 1.4 DWPD rating will exhaust endurance faster.
Kohokohdat
- Read-intensive design optimised for data centres
- 4 DWPD endurance rating supports continuous operation
- 32-layer V-NAND technology enhances reliability
- 99K read IOPS delivers low-latency throughput
- Hot-swap 2.5" SATA form factor fits existing infrastructure
Tekniset tiedot
Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.
Kysymyksiä tästä tuotteesta
Does the 2.5 inch form factor need a hot-swap bay or can it mount in a standard drive cage?
The drive fits any 2.5 inch SATA bay; hot-swap capability depends on the enclosure you install it in.
Will the SATA 600 interface limit performance when paired with an older 3 Gbps controller?
The drive negotiates down to SATA 3 Gbps automatically so it works, but sustained IOPS will drop to the controller ceiling.
How can I verify the 99K read IOPS and 1.4 DWPD rating after installation?
Run a sustained mixed-workload benchmark such as fio and compare the reported IOPS and write endurance counters to the 99K read and 18K write targets.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
