be quiet! Dark Power 14 1000W ATX 3.1 power supply BP020US
- Black
- ATX 3.1
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
be quiet!
An 850 W ATX 3.1 power supply with 80 Plus Titanium efficiency up to 95.6 percent, PCIe 5.1 support and a 135 mm Silent Wings fan offering active or semi-passive cooling
Option Dark Power 14 850W
The be quiet! Dark Power 14 delivers 850 W of continuous power for high-end desktop builds. It meets the ATX 3.1 specification and carries 80 PLUS Titanium certification with up to 95.6 % efficiency. The fully modular design suits enthusiasts who want clean cable routing and reliable energy delivery.
A 135 mm Silent Wings fan works alongside an aluminium heatsink to support active or semi-passive cooling modes selectable by a button. Full bridge, synchronous rectifier and LLC topology provide stable voltage regulation across loads. Modular connectors include a 20+4 pin main cable, native 12V-2x6 for PCIe 5.1 graphics cards and 6+2 pin PCIe plugs for broader GPU compatibility.
The ATX 3.1 standard defines the 12V-2x6 connector for up to 600 W per cable, so a single cable can feed modern GPUs without adapters. Titanium efficiency reduces waste heat, allowing the semi-passive mode to stay silent longer under typical loads. The 10 year manufacturer warranty reflects the confidence in component longevity under these electrical limits.
| Brand | be quiet |
|---|---|
| Series | Dark Power 14 |
| Model | Dark Power 14 | 850 W |
| Part Number | 4260052192047 |
| Color | Black |
| Type | ATX 3.1 |
| Maximum Power | 850 W |
| Fans | 1 x 135 mm |
| Main Connector | 20+4Pin |
| Modular | Modular |
| Dimensions | 17.5 x 15 x 8.6cm |
| Weight | 2.2kg |
| Lähetyspaino | 4.42 kg |
| Pakkauksen mitat | 356 × 235 × 127 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The ATX 3.1 design includes a native 12V-2x6 connector that delivers up to 600W to a PCIe 5.1 graphics card without an adapter, while the 850W total capacity leaves headroom for the rest of the system.
The dimensions match the ATX form factor, so the unit fits any case with a standard PSU bay; allow clearance for the 135mm fan and modular cable plugs at the rear.
Press the button on the PSU rear to toggle modes; the mistake is forgetting to verify the LED indicator matches the desired mode before closing the case.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?