Bestoss
Bestoss GM228 256GB M.2 2280 NVMe internal SSD
- Internal Solid Stat…
- Consumer
41,99 $
0.00052754BTC
Varastossa
Bestoss
Bestoss GM228 1TB M.2 2280 NVMe internal SSD
1TB M.2 2280 NVMe SSD with PCIe 3.0 x4 reaching 2200 MB/s read and 1500 MB/s write using 3D NAND and HMB cache
- Max Sequential ReadUp to 2200 MBps
- Max Sequential WriteUp to 1500 MBps
- Form FactorM.2 2280
- Capacity1TB
- InterfacePCI-Express 3.0 x4
- Memory Components3D NAND
- Sequential reads up to 2200 MBps for faster system response
- Sequential writes up to 1500 MBps speed up file transfers
- PCIe 3.0 x4 interface fits most laptop and desktop M.2 slots
- 3D NAND with dynamic SLC cache improves endurance over QLC alternatives
- 88-hour endurance testing validates long-term reliability
1TB PCIe 3.0 x4 NVMe SSD
The Bestoss GM228 is a 1TB M.2 2280 internal solid-state drive that uses a PCIe 3.0 x4 interface and the NVMe protocol. It is built with 3D NAND flash and operates without a DRAM cache, relying on host memory buffer technology. The drive targets consumers who want faster boot times and application loading on a desktop or laptop.
Sustained write behaviour with dynamic SLC cache
Sequential reads reach up to 2200 MBps and sequential writes up to 1500 MBps. A dynamic SLC cache absorbs burst workloads before the drive writes directly to TLC NAND. The manufacturer states the SSD has passed an 88 hour endurance test, indicating stable performance during prolonged transfers rather than only in short bursts.
Thermals, noise and power draw
With no moving parts the drive runs silently in normal use. The DRAM-less design and PCIe 3.0 x4 link keep power consumption modest for a 1TB NVMe device. Heat output stays low enough for typical laptop or desktop M.2 slots without requiring additional cooling.
Kohokohdat
- Sequential reads up to 2200 MBps for faster system response
- Sequential writes up to 1500 MBps speed up file transfers
- PCIe 3.0 x4 interface fits most laptop and desktop M.2 slots
- 3D NAND with dynamic SLC cache improves endurance over QLC alternatives
- 88-hour endurance testing validates long-term reliability
Tekniset tiedot
| Max Sequential Read | Up to 2200 MBps |
|---|---|
| Max Sequential Write | Up to 1500 MBps |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Interface | PCI-Express 3.0 x4 |
| Memory Components | 3D NAND |
| Protocol | NVMe |
| Cache | No DRAM (HMB) |
| Brand | Bestoss |
| Series | GM Series |
| Model | GM228 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
Tämän mallin muut versiot
5 lisää samasta mallistosta
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Bestoss
Bestoss GM328 512GB NVMe internal SSD
- Up to 3200 MBps
- Up to 2500 MBps
62,99 $
0.00079137BTC
Varastossa
Bestoss
Bestoss GM228 512GB M.2 2280 NVMe internal SSD
- Up to 2200 MBps
- Up to 1500 MBps
69,99 $
0.00087932BTC
Varastossa
Bestoss
Bestoss GM328 1TB NVMe internal SSD
- Up to 3200 MBps
- Up to 2500 MBps
109,99 $
0.00138185BTC
Varastossa
Kysymyksiä tästä tuotteesta
How much power does the Bestoss GM228 draw and does it run hot during all-day use?
The drive uses PCIe 3.0 x4 with HMB and dynamic SLC cache, a DRAM-less design that keeps power draw low and heat minimal during continuous operation; it passed an 88-hour endurance test without throttling.
What slot and protocol must my motherboard provide for this M.2 2280 NVMe drive to work?
Your board needs an M.2 2280 key-M slot wired for PCIe 3.0 x4 (NVMe); the drive is also recognised on PCIe 4.0 slots but will run at Gen 3 speeds.
Will the GM228 slow down if I keep it alongside an older PCIe 3.0 drive on the same motherboard?
Each M.2 slot negotiates its own link; the GM228 will run at its rated PCIe 3.0 x4 speeds regardless of other drives, provided the chipset or CPU allocates enough lanes.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
