Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black dual vertical monitor arm with tall aluminium pole, two gas-spring arms, C-clamp and grommet bases, VESA plates attached

BFKK

BFKK 24-57" Dual Vertical Monitor Arm 59.4 lbs Black

SKU CH-K0MQ-C45DH

Stacked dual monitor arm holds 24–57 in. screens up to 59.4 lbs each with 33.46 in. height range and 45.66 in. reach

  • ColorBlack

Color Black

  • Supports stacked or side-by-side layouts for 24-57 inch monitors
  • Holds flat screens up to 59.4 lbs and curved up to 48.4 lbs per arm
  • Full motion with 180° swivel, 60° tilt, and 180° rotation
  • Extends 45.66 inches and reaches 33.46 inches height from desk
  • C-clamp and grommet bases fit desks 0.39-1.97 inches thick

Dual Vertical Mount for 24 to 57 Inch Screens

This dual vertical monitor arm holds two flat or curved displays from 24 to 57 inches. Each arm supports up to 59.4 lbs for flat panels and 48.4 lbs for curved models. The column reaches 33.46 inches from the desk surface and the arms extend 45.66 inches for flexible positioning.

Capacity and Weight Limits

VESA patterns of 75x75, 100x100, 200x100 and 200x200 mm are supported on each arm. The aluminium structure and gas springs keep heavy ultrawide screens stable through the full range of motion. Buyers with monitors above 57 inches or heavier than the stated limits should verify compatibility before ordering.

Desk Integration and Adjustment

The mount installs with the included C-clamp or grommet base on desks from .39 to 1.97 inches thick. Each screen swivels 180 degrees, tilts from +60 to -20 degrees and rotates 180 degrees for portrait or landscape use. Detachable VESA plates simplify the initial assembly and later screen changes.

Kohokohdat

  • Supports stacked or side-by-side layouts for 24-57 inch monitors
  • Holds flat screens up to 59.4 lbs and curved up to 48.4 lbs per arm
  • Full motion with 180° swivel, 60° tilt, and 180° rotation
  • Extends 45.66 inches and reaches 33.46 inches height from desk
  • C-clamp and grommet bases fit desks 0.39-1.97 inches thick

Tekniset tiedot

ColorBlack

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 59.4 lb capacity per arm handle my existing 49-inch ultrawide if I stack it above a 24-inch display?

Each arm holds a flat screen up to 59.4 lbs and a curved screen up to 48.4 lbs. Verify your ultrawide’s weight and ensure its VESA mounting hardware is already attached to the back before stacking.

How can I confirm the gas-spring tension is set correctly after I mount two monitors?

The arms should keep each screen stationary at any angle within the +60°/-20° tilt, 180° swivel and 180° rotation range without drifting. If a monitor moves on its own, adjust the tension bolt until it stays put.

Does the package include both the C-clamp and grommet base, or do I need to buy a separate desk mount?

Both a C-clamp and a grommet base are included, fitting desk thicknesses from 0.39" to 1.97". Detachable VESA plates for 75×75, 100×100, 200×100 and 200×200 mm patterns are also in the box.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.