Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White dual monitor arm with two articulated joints and desk clamp base

BFKK

BFKK Dual Monitor Arm 2×13–32″ 17.6 lb White

SKU CH-TXN8-F3EK7

Holds two 13–32″ screens up to 17.6 lb each on fully adjustable arms with VESA 75/100 mounting and C-clamp or grommet desk attachment

  • TypeMount
  • ColorWhite

Color White

  • Holds two 13″–32″ screens up to 17.6 lb each
  • Mounts via C-clamp .39″–3.15″ or grommet .39″–2.17″ desk
  • ±45° tilt, ±90° swivel, 360° rotation for any viewing angle
  • Raises monitors 16.3″ high to free desk space
  • Extra base plate and steel clamp keep large screens stable

Dual monitor arm for 13–32″ screens

This white dual monitor arm holds two displays from 13 to 32 inches, each up to 17.6 lb. It supports 75 × 75 mm and 100 × 100 mm VESA patterns. The package includes hardware for C-clamp and grommet mounting. It suits home and office desks needing two adjustable screens.

Installation fits desks .39–3.15″ thick

C-clamp mounting works on desks .39 to 3.15 inches thick while grommet mounting covers .39 to 2.17 inches. An Allen key is required to secure the bolts. The extra base plate on the pole adds stiffness during tightening. Misaligned VESA holes or over-tightened bolts are the common issues.

Arms reach 16.3″ height under full load

The articulating arms extend to a maximum height of 16.3 inches above the desk. Each arm provides ±45° tilt, ±90° swivel and 360° rotation. Steel construction and the reinforced pole keep both screens stable at full extension. The mount maintains position without drift during daily adjustments.

Kohokohdat

  • Holds two 13″–32″ screens up to 17.6 lb each
  • Mounts via C-clamp .39″–3.15″ or grommet .39″–2.17″ desk
  • ±45° tilt, ±90° swivel, 360° rotation for any viewing angle
  • Raises monitors 16.3″ high to free desk space
  • Extra base plate and steel clamp keep large screens stable

Tekniset tiedot

TypeMount
ColorWhite

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I confirm the arms are holding each monitor at the rated 17.6 lb capacity after installation?

Each arm supports one 13″ to 32″ screen up to 17.6 lb; verify the monitor stays level and the gas spring holds position without drifting when you release it.

What mounting hardware is included and what must I supply separately?

The package includes all bolts, spacers and an Allen key for both C-clamp (desk thickness .39″ to 3.15″) and grommet (desk thickness .39″ to 2.17″) installation; you only need a monitor with 75×75 mm or 100×100 mm VESA holes.

Which version should I choose if I need the maximum 16.3″ pole height for a tall desk setup?

This single white model already provides the full 16.3″ maximum height above the desk, so no alternate version is required.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.