Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White full-tower case with tempered glass side panel, ten fan positions and 360 mm water-cooling support

BFKK

BFKK E-ATX Full Tower Case White 10 Fan 360mm Water Cooling 417mm GPU

SKU CH-4HBB-0T0C0

A white E-ATX full-tower case with ten fan slots, 360 mm water-cooling support, room for a 417 mm GPU and five drive bays

  • TypeE-ATX Full Tower Case
  • Supports E-ATX, ATX, Micro-ATX and Mini-ITX motherboards
  • Fits graphics cards up to 417 mm with vertical mounting option
  • Holds three 3.5" and two 2.5" drives for ample storage
  • Ten fan positions including 120 mm and 140 mm slots for strong airflow
  • Compatible with 360 mm water-cooling radiators for liquid cooling builds

Chassis Scale

The BFKK E-ATX full-tower chassis accepts motherboards up to E-ATX size and graphics cards up to 417 mm long. It provides three 3.5" drive bays and two 2.5" bays for mixed storage layouts. A tempered-glass side panel shows the internal build.

Airflow Capacity

Ten fan positions are distributed across front, top and rear panels for sustained airflow under load. The front accepts three 140 mm or three 120 mm fans, the top takes two 140 mm or three 120 mm fans, and the rear holds one 120 mm fan. Fans are not included.

Radiator Clearance

A 360 mm radiator can be fitted in the front or top positions for liquid-cooling builds. Builders using oversized CPU coolers or tall memory modules should verify clearance against the motherboard tray and front fan mounts before ordering. Vertical GPU mounting is supported but requires a separate riser cable.

Kohokohdat

  • Supports E-ATX, ATX, Micro-ATX and Mini-ITX motherboards
  • Fits graphics cards up to 417 mm with vertical mounting option
  • Holds three 3.5" and two 2.5" drives for ample storage
  • Ten fan positions including 120 mm and 140 mm slots for strong airflow
  • Compatible with 360 mm water-cooling radiators for liquid cooling builds

Tekniset tiedot

TypeE-ATX Full Tower Case

Kysymyksiä tästä tuotteesta

How loud and hot does the case get when all 10 fan positions are filled and running continuously?

With ten fan slots — three 140 mm or 120 mm at the front, three 120 mm in the power-supply area, two 140 mm or three 120 mm on top, and one 120 mm rear — you can move a large volume of air at low RPM, keeping noise and internal temperatures down during all-day operation.

Which fans or radiators must I already own to use the 360 mm water-cooling support and the ten fan mounts?

The case accepts a 360 mm radiator and up to ten fans in 120 mm or 140 mm sizes, but no fans or radiator are included, so you need to supply them yourself.

Will my existing E-ATX motherboard, 417 mm graphics card and five drives fit together without clearance issues?

The chassis supports E-ATX, ATX, Micro-ATX and Mini-ITX boards, graphics cards up to 417 mm long in horizontal or vertical orientation, three 3.5″ drives and two 2.5″ drives simultaneously.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.