Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 90mm square case fan, 25mm thick, no LED

BGears

BGears b-BlasterPWM 90 90mm case fan 1200-5000 RPM 118 CFM 2 ball bearing PWM

SKU CH-0G69-J5FXB MPN b-BlasterPWM 90

90 mm PWM case fan with dual ball bearings, 1,200–5,000 RPM range and 118 CFM peak airflow

  • Fan Size90mm
  • Bearing Type2 Ball
  • RPM1200 to 5000RPM±10%
  • Air Flow13
  • LEDNone
  • Dimensions90x90x25
  • High airflow of 118 CFM for strong case cooling
  • Wide PWM speed range from 1200 to 5000 RPM for flexible control
  • Dual ball bearing design for durable long-term operation
  • Peak static pressure of 12.0 mmH2O handles restrictive airflow paths
  • Compact 90 mm frame fits tight build spaces

Product Identity

The BGears b-BlasterPWM 90 is a 90 mm case fan built around a dual ball-bearing motor and a four-pin PWM controller. It targets system integrators and enthusiasts who need high airflow in a compact frame for small-form-factor or densely packed builds.

Suitability

This fan suits builders who want a wide 1200 to 5000 RPM range and strong static pressure up to 12.0 mmH2O for restrictive radiators or heatsinks. It is not for buyers who need a larger frame size, integrated lighting or silent operation at low loads.

Decisive Specification

The 90 mm frame with 118 CFM maximum airflow and a 6.24 W power draw at 0.52 A determines fit. Verify that your case or cooler mounts accept a 90 x 90 x 25 mm unit and that your fan header can supply the required current.

Kohokohdat

  • High airflow of 118 CFM for strong case cooling
  • Wide PWM speed range from 1200 to 5000 RPM for flexible control
  • Dual ball bearing design for durable long-term operation
  • Peak static pressure of 12.0 mmH2O handles restrictive airflow paths
  • Compact 90 mm frame fits tight build spaces

Tekniset tiedot

BrandBgears
SeriesBlaster
ModelPWM
Part Numberb-BlasterPWM 90
Fan Size90mm
Bearing Type2 Ball
RPM1200 to 5000RPM±10%
Air Flow13
LEDNone
Dimensions90x90x25
Lähetyspaino0.57 kg
Pakkauksen mitat121 × 102 × 10 mm

Kysymyksiä tästä tuotteesta

How do I mount the 90mm frame and connect the 4-pin PWM header without reversing the wire order?

Align the four 90mm mounting holes with the case or radiator, secure with the supplied screws, then plug the 4-pin connector into the motherboard PWM header so the keyed notch matches — the fan will not spin if the plug is seated backwards.

When will the dual ball bearings need replacement?

The 2 ball bearing design is rated for continuous operation at up to 5000 RPM; under typical case airflow loads expect several years before audible wear appears, at which point the entire fan unit is replaced.

At what static pressure does airflow start to drop off during sustained high-RPM operation?

Maximum static pressure is 12.0 mmH₂O; beyond that point the 118 CFM airflow curve declines sharply, so the 12.0 mmH₂O limit is the first constraint you hit under sustained load.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.