BGears b-PWM 90 Blue 90mm case fan 500-4000 RPM 88 CFM 39 dBA 2 Ball
- 1 Fan
- No Controller
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
BGears
90mm PWM case fan delivering up to 88CFM airflow at 4000RPM with dual ball bearings and 15 translucent blades
The BGears b-PWM 90 Black is a single 90mm case fan built for systems that need focused airflow in tight spaces. It uses a 4-pin PWM connector so the motherboard can vary speed automatically from 500 to 4000 RPM. The dual ball bearing is rated for sustained high-speed operation. Fifteen translucent black blades move up to 88 CFM at a listed 39 dBA.
This fan suits small-form-factor cases or side-panel mounts where only a 90mm frame fits and strong static pressure is required. The included 3-to-4-pin Molex adapter lets it run from a PSU when a PWM header is absent. Buyers needing RGB lighting or larger 120mm and 140mm frame sizes should look at other models in the same series.
The 4000 RPM ceiling and 2-ball bearing combine to deliver the highest airflow this 90mm frame can produce. PWM control keeps noise low at idle while the bearing tolerates continuous maximum speed. If your thermal target can be met at lower RPM, a quieter sleeve-bearing alternative may be preferable.
| Brand | Bgears |
|---|---|
| Model | b-PWM 90 Black |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 90mm |
| Fan Thickness | 25mm |
| Bearing Type | 2 Ball |
| RPM | 4000 RPM |
| Air Flow | up to 88CFM |
| Power Connector | 4 Pin |
| Color | Black |
| Features | Extreme airflow range for ultimate cooling and control 2 Ball Bearing designed for high speed high performance Better cooling and silent system performance thru PWM fan speed control 15 aerodynamic design fan blades for better airflow and stability 15 translucent blades (No LED for Translucent Black, Blue LED for Translucent Blue and Red LED for Translucent Red) This fan can also be directly connected to a standard mini 3 pin connector on the motherboard or fan controllers Mini 4 pin connector, 3 to 4 pin Molex adapter and 4 screws included Available in 120mm and 140mm Available in T |
| Lähetyspaino | 0.13 kg |
| Pakkauksen mitat | 203 × 141 × 39 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The 2 ball bearing is designed for high speed high performance and typically outlasts sleeve bearings, though exact lifespan depends on operating conditions and duty cycle.
The 39 dBA noise level at maximum speed becomes the practical ceiling before thermal or mechanical limits are reached under sustained load.
At 4000 RPM it produces 39 dBA; PWM control lets it drop to 500 RPM for quieter idle, and the 4 pin connector draws only the current needed for the selected speed.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?