Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular metal mining unit with front grille and rear power sockets

bitmain

bitmain Antminer S19 95TH/s 3250W SHA256 mining hardware

SKU CH-RNQN-MCKMX

SHA-256 miner delivering 95 TH/s at 3,250 W with integrated 220 V power supply and four 12038 fans

  • 95 TH/s hash rate for strong Bitcoin and BCH mining
  • 3250 W power draw at 34.5 J/TH energy efficiency
  • 4 × 12038 fans cool operation from 0 °C to 40 °C
  • RJ45 10/100M Ethernet keeps the miner connected reliably
  • Integrated chassis design simplifies rack layout and saves farm space

Bitmain Antminer S19 SHA256 Miner

The Bitmain Antminer S19 is a SHA256 ASIC miner built for Bitcoin and Bitcoin Cash networks. It delivers a hash rate of 95 TH/s with a tolerance of plus or minus three percent. The unit draws 3250 W and achieves a power efficiency of 34.5 J/TH. It ships new with an integrated power supply and requires a 220 V supply, so a boosting transformer is needed where mains voltage is lower.

Suitable operators and constraints

This miner suits operators who have access to 220 V power and can accommodate 80 dB of fan noise from the four 12038 cooling fans. The working temperature range is 0 °C to 40 °C, so a controlled environment is necessary. Buyers without 220 V infrastructure or quiet‑space requirements should consider other solutions.

Deciding specification — 220 V input

The rated input voltage is 11.6 to 130 V internally, but the manufacturer states the machine requires a 220 V external supply and a boosting transformer if the local mains voltage is lower. Confirm your site voltage before purchase; without 220 V the miner cannot operate.

Kohokohdat

  • 95 TH/s hash rate for strong Bitcoin and BCH mining
  • 3250 W power draw at 34.5 J/TH energy efficiency
  • 4 × 12038 fans cool operation from 0 °C to 40 °C
  • RJ45 10/100M Ethernet keeps the miner connected reliably
  • Integrated chassis design simplifies rack layout and saves farm space

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How can I confirm the Antminer S19 is hashing at the rated 95 TH/s after I connect it?

Log into the miner's web interface via the RJ45 Ethernet port; the dashboard shows real-time hash rate, average hash rate and fluctuations so you can verify it stays within the 95 ±3% TH/s range.

What ships with the S19 and what must I source myself?

The unit includes the integrated miner with four 12038 fans and an onboard power supply; you must provide a 220 V boosting transformer and a standard RJ45 network cable.

Which voltage version of the S19 should I order for a 220 V supply?

This model is rated for 220 V input (operating range 11.6–130 V on the internal rails), so choose this version only if your site can deliver 220 V after the required boosting transformer.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.