Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver mining server with four front fans and ventilation grilles

bitmain

Bitmain Antminer S19 XP 141TH/s 3010W Rack Server

SKU CH-YRR1-PDJT4

A Bitcoin miner delivering 141 TH/s at 3010 W with 21.5 J/TH efficiency

  • TypeMiner
  • 5 nm chip design delivers 141 TH/s hashrate
  • 5 J/TH efficiency reduces electricity cost per terahash
  • 3010 W power draw fits standard 3-phase PDU strips
  • 75 dB noise level suits dedicated rack rooms
  • 195 x 290 x 400 mm form factor slides into 19-inch cabinets

Bitmain Antminer S19 XP 141TH/s Miner

The Bitmain Antminer S19 XP is a new server system designed for cryptocurrency mining. It delivers a hash rate of 141TH/s with a power draw of 3010W. The unit measures 195 x 290 x 400mm and weighs 14500g. Four fans produce a noise level of 75db during operation.

Suited for dedicated mining operations

This hardware suits operators who need high hash-rate density and 21.5 J/TH efficiency in a rack-mount form factor. It is not for buyers who require a general-purpose server, quiet office equipment, or a device with standard return policies. The 3010W power demand also rules out sites without adequate electrical infrastructure.

141TH/s hash rate at 21.5 J/TH efficiency

The decisive specification is the 141TH/s hash rate achieved at 21.5 J/TH. This ratio determines whether the miner meets your profitability threshold at current electricity costs. No other figure in the data sheet overrides this efficiency metric for purchase decisions.

Kohokohdat

  • 5 nm chip design delivers 141 TH/s hashrate
  • 5 J/TH efficiency reduces electricity cost per terahash
  • 3010 W power draw fits standard 3-phase PDU strips
  • 75 dB noise level suits dedicated rack rooms
  • 195 x 290 x 400 mm form factor slides into 19-inch cabinets

Tekniset tiedot

TypeMiner

Kysymyksiä tästä tuotteesta

What power supply capacity is needed to run the 3010W Antminer S19 XP?

You need a power source that can deliver at least 3010 W continuously, with the correct high-current connectors for the miner's input terminals.

Will the 75 dB noise level of this S19 XP be noticeably louder than older S19 units I already run?

At 75 dB the S19 XP sits in the same loud-industrial range as earlier S19 models, so expect a similar acoustic footprint in your rack.

How can I confirm the miner is achieving its rated 141 TH/s after installation?

Check the dashboard on the controller board or your mining-pool worker page; a stable reading near 141 TH/s with 21.5 J/TH efficiency shows it is operating as specified.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.