Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six black sparkle brass G1/4 fittings for 16mm rigid tubing

Bitspower

Bitspower BP-BSEML16-6P G1/4" Multi-Link Fitting 16mm OD Black Sparkle 6-pack

SKU CH-KBX6-3MTDJ MPN BP-BSEML16-6P

Six G1/4″ multi-link fittings extend 16 mm rigid tubing runs with a true hi-flow brass design and durable Black Sparkle nickel finish

  • TypeFittings
  • True Hi-Flow design maximises coolant throughput
  • High-quality brass construction ensures long-term reliability
  • Durable Black Sparkle nickel finish resists wear and corrosion
  • G1/4" threads with 5 mm length fit standard water-cooling components
  • Six-piece pack covers multiple rigid-tube connections in one purchase

Multi-Link Fitting 6-Pack for 16mm Rigid Tubing

This set contains six G1/4-inch multi-link extension fittings designed for 16mm OD rigid tubing. The True Hi-Flow design minimises restriction inside a custom liquid-cooling loop. High-quality brass construction with a durable Black Sparkle nickel finish suits enthusiasts building showpiece systems.

Simple Thread-In Installation

Each fitting screws into a standard G1/4 port with a 5mm thread length; hand-tighten plus a slight turn with a spanner is sufficient. An extra O-ring is included for tubing with a marginally smaller OD such as cut brass tube. Before powering the full system, run the pump alone for a 24-hour leak test to protect components.

Verify Port Thread And Tubing Compatibility First

Confirm that your blocks, radiators and reservoirs provide G1/4-inch female ports. The fittings are specified for use with Bitspower 16mm OD rigid tubing only; other brands or soft tubing will not seal correctly. Check that your loop layout has space for the multi-link extension length between components.

Kohokohdat

  • True Hi-Flow design maximises coolant throughput
  • High-quality brass construction ensures long-term reliability
  • Durable Black Sparkle nickel finish resists wear and corrosion
  • G1/4" threads with 5 mm length fit standard water-cooling components
  • Six-piece pack covers multiple rigid-tube connections in one purchase

Tekniset tiedot

TypeFittings

Kysymyksiä tästä tuotteesta

How can I verify the G1/4" Multi-Link fittings are sealed correctly after installing them on 16mm OD rigid tubing?

After assembly, run a 24-hour leak test with only the pump powered on before adding coolant to the loop. This confirms the fittings and tubing connections hold pressure without dripping.

What comes in the 6-pack and what extra parts might I need for a complete rigid-tube run?

The pack contains six G1/4" Multi-Link fittings with Black Sparkle nickel finish and spare O-rings for slightly undersized tubing. You must purchase 16mm OD rigid tubing separately.

Which fitting version matches a G1/4" thread with 5mm thread length for 16mm OD tubing?

This BP-BSEML16-6P model provides exactly that specification: G1/4" thread, 5mm thread length, and compatibility with 16mm OD rigid tubing in a six-piece set.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.