Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six matte black brass G1/4 fittings for 14mm rigid tubing

Bitspower

Bitspower BP-MBEML14-6P G1/4" Multi-Link Fitting 14mm OD 6-pack

SKU CH-P5EN-HKCD7 MPN BP-MBEML14-6P

Six-pack of matte-black G1/4″ multi-link fittings for 14 mm OD rigid tubing

  • TypeFittings
  • True Hi-Flow design maximises coolant throughput
  • High-quality brass construction ensures lasting durability
  • Matt black nickel finish resists corrosion and wear
  • G1/4 inch thread with 5 mm length fits standard blocks
  • Six-piece pack simplifies multi-link rigid tube runs

Multi-Link Extension Fitting

These G1/4" fittings extend rigid-tube runs in custom liquid-cooling loops. The six-piece pack suits builders who need extra length between components without adding angled adapters. They are not for soft-tube systems or loops that require quick-disconnect couplings.

14mm OD Compatibility

Each fitting accepts 14mm outer-diameter rigid tubing and includes a spare O-ring for slightly undersized tube such as cut brass. The G1/4" thread with 5mm engagement depth is the single dimension that decides fitment with blocks, radiators and reservoirs.

Installation Notes

Hand-tighten the knurled collar until the O-ring seats, then give a light quarter-turn with a soft-jaw wrench. Over-tightening can score the matt black nickel finish. Run a 24-hour leak test with only the pump powered before adding coolant to the full system.

Kohokohdat

  • True Hi-Flow design maximises coolant throughput
  • High-quality brass construction ensures lasting durability
  • Matt black nickel finish resists corrosion and wear
  • G1/4 inch thread with 5 mm length fits standard blocks
  • Six-piece pack simplifies multi-link rigid tube runs

Tekniset tiedot

TypeFittings

Kysymyksiä tästä tuotteesta

How does the 14 mm outer-diameter spec translate when the fitting is installed in a loop?

The fitting is engineered for 14 mm OD rigid tubing, so the tube seats directly into the Hi-Flow bore without adapters, maintaining full internal diameter for unrestricted coolant flow.

What does the G1/4" thread with a 5 mm length mean for component compatibility?

The standard G1/4" thread mates with any G1/4" port on blocks, radiators or reservoirs, while the 5 mm thread depth ensures a secure seal without bottoming out in shallow ports.

What clearance or spacing is needed to mount these multi-link fittings in a build?

Each fitting adds a straight 14 mm OD extension; allow enough room for the tube to enter squarely and for the hex body to be tightened without fouling adjacent components.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.