Bitspower
Bitspower BPTA-NJORD120-DRGB-3 case fan 3-pack 120mm PWM DRGB white
- 3 Fans
- Case Fan
36,99 $
0.00047412BTC
Varastossa
Bitspower
Bitspower BPTA-NJORD120-DRGB 120mm DRGB case fan
A 120 mm PWM case fan with addressable DRGB lighting, 800–1800 RPM speed range and 25–28 dBA noise level
- Fan Counts1 Fan
- TypeCase Fan
- Fan Size120mm
- Fan Thickness25mm
- RPM800~1800 RPM±10%
- Noise Level25~28dBA(Max)
Fan Size 120mm
- 140mm
- 120mm
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
Model NJORD II
- NJord Dual Fin
- NJORD II
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
- PWM control up to 1800 RPM for adjustable airflow
- 9-blade design delivers strong static pressure at 25 dBA max
- Addressable DRGB LEDs sync with major motherboard ecosystems
- Vibration-damping rubber corners eliminate rattling during operation
- 30000-hour rated lifespan ensures long-term reliability
120mm PWM DRGB case fan
The Bitspower Touchaqua NJORD II 120 is a single 120mm PWM case fan designed for builders who want addressable lighting and adjustable airflow. It suits radiators, chassis intake or exhaust positions where a white 25mm frame fits. The fan targets users who synchronise lighting across multiple components.
Vibration pads and daisy-chain DRGB
Rubber pads on all four corners suppress rattling at speeds between 800 and 1800 RPM while noise stays between 25 and 28 dBA. Digital RGB LEDs sit around the centre shaft and can be daisy-chained to other Bitspower fans. Certified sync support covers ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome and Razer Chroma.
Check voltage headers and clearance
Verify your motherboard provides a 4-pin PWM header for the fan motor and a 5V addressable RGB header for the LEDs. The fan runs on 12V DC while the lighting uses 5V DC, with an operating range of 7V to 13.2V. Ensure 120mm by 25mm mounting space is available in your case or on your radiator.
Kohokohdat
- PWM control up to 1800 RPM for adjustable airflow
- 9-blade design delivers strong static pressure at 25 dBA max
- Addressable DRGB LEDs sync with major motherboard ecosystems
- Vibration-damping rubber corners eliminate rattling during operation
- 30000-hour rated lifespan ensures long-term reliability
Tekniset tiedot
| Brand | Bitpower |
|---|---|
| Series | Bitspower NJORD II |
| Model | BPTA-NJORD120-DRGB |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| RPM | 800~1800 RPM±10% |
| Noise Level | 25~28dBA(Max) |
| Power Connector | 4 Pin |
| Color | White |
| LED | DRGB |
| Features | Rated Voltage: Fan DC12V /LED DC 5V Operation Voltage: 7V-13.2V Staring Voltage: =7V Fan Speed: 800~1800 RPM±10% Noise Level: 25~28dBA(Max) Life time:30000 Hours No.of Blades: 9 leaves |
Tämän mallin muut versiot
2 lisää samasta mallistosta
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Bitspower
Bitspower Touchaqua NJORD II 120 PWM Digital RGB Case Fan 5-Pack White
- Case Fan
- Case
58,99 $
0.00075611BTC
VarastossaKysymyksiä tästä tuotteesta
What does the 4-pin PWM connector allow me to control?
The 4-pin PWM connector lets the motherboard adjust fan speed between 800 and 1800 RPM based on temperature.
Will the 120 mm by 25 mm frame fit my case fan slots?
The fan measures 120 mm square and 25 mm thick, matching standard 120 mm mounting holes on most cases and radiators.
How do I connect the DRGB lighting so it syncs with my motherboard software?
Plug the 5 V DRGB header into a compatible motherboard 5 V addressable RGB header, then enable sync in ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome or Razer Chroma.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001051BTC
Varastossa