Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two silver compression fittings for 16mm rigid tubing

Bitspower

Bitspower BPTA-TFHA16-GS G1/4" 16mm OD rigid tube fitting 2-pack Glorious Silver

SKU CH-HB2Y-A2ZE8 MPN BPTA-TFHA16-GS

Two G1/4" compression fittings secure 16 mm OD rigid tubing in a Glorious Silver finish

  • TypeFittings
  • Compression design secures 16mm OD rigid tubing
  • G1/4" thread fits standard water-cooling components
  • Glorious Silver finish matches premium loop aesthetics
  • Two fittings per pack cover a basic run
  • RoHS compliant materials meet environmental standards

G1/4" compression fittings for 16mm OD rigid tubing

These Bitspower Touchaqua Advanced fittings connect 16mm outer-diameter hard tubing to any component with a G1/4" thread. The compression design secures the tube without adhesives and the Glorious Silver finish matches silver-themed loops. Each pack contains two fittings.

For custom-loop builders using 16mm rigid tubing

Suits builders assembling a custom water-cooling loop with 16mm OD hard tubes and standard G1/4" ports. Not for systems using soft tubing, smaller or larger rigid tubing diameters, or non-G1/4" thread standards.

G1/4" thread with 5mm thread length

The fitting carries a G1/4" thread that is 5mm long, which determines whether it will seat properly in your blocks, radiators, reservoirs or pumps. Verify that your components accept a 5mm thread engagement before purchase.

Kohokohdat

  • Compression design secures 16mm OD rigid tubing
  • G1/4" thread fits standard water-cooling components
  • Glorious Silver finish matches premium loop aesthetics
  • Two fittings per pack cover a basic run
  • RoHS compliant materials meet environmental standards

Tekniset tiedot

TypeFittings

Kysymyksiä tästä tuotteesta

Will the G1/4" threads on these 16mm OD compression fittings need periodic re-tightening or O-ring replacement?

The compression design seals against the rigid tube and the G1/4" port; no scheduled maintenance is required beyond a visual check for leaks after initial assembly.

What is the first limitation you hit when running a loop with these fittings continuously under load?

The 5 mm thread engagement depth and the compression-ring seal set the mechanical limit; exceeding the tubing or block pressure rating will fail before the fitting itself.

Do these silver compression fittings generate any audible noise or measurable heat during all-day operation?

The fittings are passive metal components with no moving parts; they add no noise and negligible thermal resistance to the loop.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.