Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Straight brass tube, deep red finish, 14mm OD, 500mm length

Bitspower

Bitspower None Chamfer Brass Hard Tubing OD14mm Deep Red 500mm

SKU CH-N27Q-PMPYS

Brass hard tubing with 14 mm outer diameter and .7 mm wall thickness, 500 mm long in deep red for custom liquid-cooling loops

  • TypeLiquid Cooling System
  • Deep red brass tubing adds vivid colour to custom loops
  • OD 14 mm brass tube with 0.7 mm wall thickness for strength
  • 500 mm straight length ready to cut and chamfer
  • Double wall thickness improves durability in high-pressure builds
  • RoHS compliant material meets environmental safety standards

Hard-tubing for custom loops

This 14 mm outer-diameter brass tube is cut to 500 mm and finished in a deep-red coating. It is intended for builders assembling a custom liquid-cooling loop who want rigid tubing with a distinctive colour. The plain ends require cutting and chamfering before installation.

Thermals and power

The tube itself carries no active components, so it adds no heat, noise or electrical draw to the system. Thermal performance depends entirely on the coolant, radiator and pump chosen by the builder.

Build and connections

Double-thickness walls at 0.7 mm give the brass extra rigidity and durability. RoHS-compliant material ensures restricted substances are absent. Bitspower recommends using their OD14 mm hard-fitting series and the dedicated BP-CMMTC metal tubing cutter to avoid damaging the coloured coating during preparation.

Kohokohdat

  • Deep red brass tubing adds vivid colour to custom loops
  • OD 14 mm brass tube with 0.7 mm wall thickness for strength
  • 500 mm straight length ready to cut and chamfer
  • Double wall thickness improves durability in high-pressure builds
  • RoHS compliant material meets environmental safety standards

Tekniset tiedot

TypeLiquid Cooling System

Kysymyksiä tästä tuotteesta

How do I install the 14 mm OD brass tubing without cracking the deep red finish?

Cut to length with the Bitspower BP-CMMTC metal tubing cutter, then chamfer the ends before inserting into OD14 mm hard fittings; the cutter prevents the colour coating from breaking.

What upkeep will the brass tube need after it is in the loop?

The RoHS-compliant brass resists corrosion, so only periodic coolant changes and visual checks for discolouration or deposits are required; the tube itself has no service interval.

At what point does the 0.7 mm wall thickness limit heat dissipation during long loads?

The thin 0.7 mm wall transfers heat quickly, so the practical limit is the coolant temperature reaching the fluid’s thermal capacity, not the tube wall itself.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.