Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver G1/4 inch fitting for 1/2 inch tubing with 15mm side length

Bitspower

Bitspower Silver Shining G1/4" 1/2" Fitting 15mm

SKU CH-HE9N-2334W

Connects 1/2" tubing with a 15mm G1/4" thread using nickel-plated brass and a hidden O-ring

  • TypeFittings
  • True Hi-Flow design maximises coolant throughput
  • High-quality brass construction ensures long-term reliability
  • Nickel plating in silver shine resists corrosion
  • Hidden O-ring seal prevents leaks cleanly
  • RoHS compliant materials meet environmental standards

True Hi-Flow G1/4 Inch Fitting

This Bitspower Silver Shining fitting connects 1/2 inch tubing in a custom liquid-cooling loop. The true Hi-Flow design keeps internal restriction low so coolant moves freely through the system. High-quality brass construction with a durable nickel finish provides reliable sealing for enthusiasts building their own water-cooled PCs. The G1/4 inch thread fits standard water-blocks, radiators and reservoirs.

Brass Build And Nickel Finish

Precision-machined brass resists corrosion and handles normal loop pressures without deformation. The silver shining nickel coating adds surface hardness while maintaining a clean metallic look inside the case. A hiding O-ring design seats the seal inside the fitting body, reducing the chance of pinched O-rings during assembly and helping prevent slow leaks over time. RoHS compliant materials meet restricted-substance standards.

15mm Tubing Side Length

The 15mm tubing side length determines how far the tube seats into the fitting, so plan tube cuts accordingly for a tidy run. G1/4 inch threads with a 5mm thread depth work with most standard blocks and radiators, but verify component port depth before final tightening. The 1/2 inch tubing application suits larger-bore loops, while builders needing smaller tubing or angled adapters will require different fittings.

Kohokohdat

  • True Hi-Flow design maximises coolant throughput
  • High-quality brass construction ensures long-term reliability
  • Nickel plating in silver shine resists corrosion
  • Hidden O-ring seal prevents leaks cleanly
  • RoHS compliant materials meet environmental standards

Tekniset tiedot

TypeFittings

Kysymyksiä tästä tuotteesta

How do I install the Bitspower Silver Shining G1/4" fitting onto a radiator and what step is often missed?

Screw the G1/4" thread with its 5MM length into the component port by hand then give a gentle quarter-turn with a spanner; the step people skip is lubricating the hidden O-ring before pushing the 1/2" tube fully onto the 15MM barb so the ring seats without twisting.

What maintenance will this fitting need over time?

Inspect the nickel finish and hidden O-ring once a year; if the tube end shows hardening or the O-ring loses elasticity, replace the tube clamp and O-ring rather than the whole brass body.

What is the first limit that appears under sustained high-flow use?

The 5MM thread engagement depth is the limiting factor; excessive pump pressure or vibration can loosen the short thread before the Hi-Flow brass body or nickel coating shows any wear.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.