Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Bitspower

Bitspower Summit ELX CPU Water Block AMD TRX40 Gunmetal 115x75x16mm

SKU CH-PWFF-TZZPN

CPU water block for AMD TRX40 and X399 Threadripper sockets with digital RGB lighting and G1/4″ ports

  • TypeCPU Block

Model Gunmetal Edition

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

Option AMD TRX40/TRX50

  • AMD TRX40/TRX50
  • AMD X399

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Precision cooling for high-performance Threadripper CPUs
  • Digital RGB lighting certified for major motherboard sync ecosystems
  • Compact 115x75x16mm gunmetal design fits tight builds
  • Two-way tunnel layout simplifies custom loop routing
  • Dual G1/4 threads enable flexible inlet and outlet placement

Product identity

The Bitspower Summit ELX CPU water block is a liquid-cooling component built for the AMD sTRX4 socket. It targets enthusiasts assembling custom loops for Threadripper workstations on X399 or TRX40 motherboards. The gunmetal finish and addressable Digital RGB lighting are designed to be visible inside open or windowed cases. Addressable LEDs are certified for synchronisation with ASUS AURA Sync, GIGABYTE RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome, Biostar VIVID LED DJ and Razer Chroma.

Who it suits and who it does not

Builders planning a high-end Threadripper system with a custom water circuit will find the mounting hardware and G1/4″ thread ports ready to use. The two-way tunnel layout simplifies tube routing in dense builds. It is not for users on mainstream desktop sockets or for anyone relying on an all-in-one cooler with proprietary fittings. It is also not for buyers who need a block that includes a pump, reservoir or radiator in the same package.

Deciding specification

The block measures 115x75x16 mm and carries two G1/4″ ports, so the loop designer must confirm that the case and surrounding components leave enough clearance for this footprint and for straight or angled fittings. If the available space around the socket is smaller, the block cannot be installed regardless of socket compatibility.

Kohokohdat

  • Precision cooling for high-performance Threadripper CPUs
  • Digital RGB lighting certified for major motherboard sync ecosystems
  • Compact 115x75x16mm gunmetal design fits tight builds
  • Two-way tunnel layout simplifies custom loop routing
  • Dual G1/4 threads enable flexible inlet and outlet placement

Tekniset tiedot

TypeCPU Block

Tämän mallin muut versiot

1 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install the Summit ELX block on a TRX40 motherboard and what step is often missed?

Mount the block using the included screws onto the sTRX4 socket, then connect the two G1/4" ports. The step often missed is removing the protective film from the cold-plate before tightening.

What maintenance will this water block need over time?

The high-density fin stack can trap particles, so flush the loop annually and inspect the micro-channels for sediment. Replace the o-rings on the G1/4" fittings if they harden or leak.

What thermal limit appears first during sustained loads on a Threadripper CPU?

The 16 mm fin height and 115×75 mm footprint limit heat dissipation before the Digital RGB lighting or mounting hardware reaches any threshold.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.