Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Single-port OCP 2.0 mezzanine card with QSFP56 cage and PCIe 3.0 x16 gold fingers

Broadcom

Broadcom BCM957504-M1100G16 100Gbps PCIe 3.0 x16 OCP 2.0 network card

SKU CH-EQK0-0XAYJ MPN BCM957504-M1100G16

Single-port 100 Gb/s PCIe 3.0 x16 OCP 2.0 mezzanine card with QSFP56 connector supporting QSFP56, QSFP28 and QSFP+ modules or copper direct-attach cables

  • Speed100Gbps
  • ConnectorsSingle-Port
  • InterfacePCI Express v3.0 x16
  • Single-port 100 Gb/s throughput for high-density server links
  • PCI Express 3.0 x16 interface matches modern server backplanes
  • OCP 2.0 Type 2 form factor fits standard mezzanine slots
  • QSFP56, QSFP28 and QSFP+ cages accept optics or copper cables
  • BroadSAFE security hardware protects data in flight

Single-port 100Gbps OCP 2.0 adapter

The Broadcom BCM957504-M1100G16 is a new single-port network adapter delivering 100Gbps Ethernet over a PCI Express 3.0 x16 interface. It follows the OCP Mezzanine 2.0 Type 2 specification with v0.5 board dimensions and uses the BCM57504 controller with an integrated 100GbE SFI transceiver.

QSFP56 media flexibility and BroadSAFE security

The card provides a pluggable media interface accepting QSFP56, QSFP28 or QSFP+ optical transceivers as well as copper direct-attach cables. It supports 50G PAM-4 and 25G NRZ signalling and is fully compliant with the SFF-8402 standard. Broadcom BroadSAFE technology delivers the industry's most secure PCIe adapter solution.

Suited for OCP mezzanine slots needing 100GbE

This adapter fits servers and appliances with an OCP 2.0 mezzanine slot that require a single 100GbE port and SR-IOV with up to 1k virtual functions. It is not for systems lacking an OCP mezzanine connector or for deployments needing multiple ports on a single card.

Kohokohdat

  • Single-port 100 Gb/s throughput for high-density server links
  • PCI Express 3.0 x16 interface matches modern server backplanes
  • OCP 2.0 Type 2 form factor fits standard mezzanine slots
  • QSFP56, QSFP28 and QSFP+ cages accept optics or copper cables
  • BroadSAFE security hardware protects data in flight

Tekniset tiedot

BrandBroadcom
ModelBCM957504-M1100G16
Part NumberBCM957504-M1100G16
Speed100Gbps
ConnectorsSingle-Port
InterfacePCI Express v3.0 x16
Lähetyspaino0.23 kg
Pakkauksen mitat229 × 152 × 51 mm

Kysymyksiä tästä tuotteesta

Will I need to replace the optical transceiver as speeds or standards change?

The card uses a QSFP56/QSFP28/QSFP+ interface so you can swap the transceiver or direct-attach cable when requirements change.

Does the PCIe 3.0 x16 link become the bottleneck at 100 Gb/s line rate?

PCIe 3.0 x16 provides enough raw bandwidth for the single 100 Gb/s Ethernet port to run at line rate.

How much heat or noise does the adapter add when it runs continuously?

The mezzanine card has no onboard fan; thermal performance depends on the host server's airflow design.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.