NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Brute Networks
128 GB DDR5-4800 ECC registered server RDIMM, Lenovo 03LA113 compatible
This 128GB DDR5 registered DIMM is built for Lenovo servers that require ECC protection and quad-rank density. It matches Lenovo part number 03LA113 and uses major-brand chips to maintain factory warranty coverage. The module operates at 4800 MT/s with a PC5-38400 data rate. Orders are fulfilled with identically matched sticks for multi-channel stability.
Registered buffering and on-die ECC keep electrical load predictable during typical server workloads. The DDR5 architecture moves voltage regulation onto the module, reducing motherboard VRM stress. Standard airflow through populated DIMM slots is sufficient for steady-state operation at rated speed. No additional cooling provisions are required beyond normal chassis design.
Quad-rank organisation (4Rx4) maximises capacity per slot while the registered interface absorbs command-bus loading during long compute runs. ECC corrects single-bit errors on the fly, preventing silent data corruption in memory-intensive tasks. Identical module matching across channels preserves timing margins when all slots are populated for extended periods. Lifetime warranty reflects confidence in continuous-duty reliability.
| Brand | Lenovo |
|---|---|
| Capacity | 128GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major Brand Chipset |
Power down the server and unplug it. Open the chassis and locate the DDR5 DIMM slots. Align the notch on the module with the slot key and press firmly until both retention clips click. The step often missed is verifying the correct population order for 4Rx4 registered modules in the server's memory configuration guide.
No routine maintenance is required for the module itself. Keep server air intakes clean to ensure proper cooling. Replacement is only needed if a memory error is logged that persists after reseating, or if a capacity upgrade requires swapping the 128GB RDIMMs for different modules.
The primary limit under sustained load is thermal. The 4Rx4 registered design draws more power than lower-rank modules, so adequate airflow across the DDR5 DIMMs is critical to prevent throttling or errors at the rated 4800 MT/s speed.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?