NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Brute Networks
16 GB DDR4-2666 SODIMM module with 2Rx8 organisation, 1.2 V operation and non-ECC design for compatible servers
This 16GB DDR4 SODIMM module runs at 2666MHz with a 1.20V operating voltage and a 2Rx8 rank configuration. It is built with major-brand chips from Samsung, SK Hynix or Micron and is 100% compatible with systems requiring the HP 3TQ36AA part number. The unbuffered non-ECC design suits laptops and compact workstations that accept DDR4 SO-DIMM memory.
Operating at 1.20V keeps power draw modest and heat output low inside tight chassis. The module produces minimal acoustic impact because it has no active cooling and relies on system airflow. This voltage level matches the standard DDR4 specification, so the memory controller does not need extra voltage headroom during sustained workloads.
Moving from a single 8GB stick or from slower DDR4 speeds to this 16GB 2666MHz module doubles capacity and raises bandwidth for multitasking, virtual machines and large datasets. The jump is worthwhile when the platform supports 2666MHz and has a free SO-DIMM slot. Buyers whose systems are limited to lower speeds or maximum capacities below 16GB per slot will not benefit.
| Brand | HP |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
Insert the module at an angle until the gold contacts disappear, then press down firmly until both side clips click — the step most people miss is verifying both clips have fully engaged.
No scheduled maintenance is required; the module is solid-state with no moving parts, so replacement only occurs if a fault develops or capacity needs increase.
The 1.20V operating voltage and DDR4-2666 speed rating define the thermal and stability ceiling; sustained heavy workloads will hit the JEDEC voltage limit before any other constraint.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?