NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Brute Networks
32GB DDR4-2666 ECC registered RDIMM with CL15 latency and 1.2V operation for HP part 1XD86AT compatible servers
This 32GB DDR4 module operates at 2666MHz with CL15 latency and 1.20V power. It uses a 2Rx4 rank configuration on a 288-pin RDIMM form factor with ECC and registered buffering. Designed for server platforms that require registered ECC memory to maximise installed capacity.
The DDR4-2666 standard sets the data rate at 2666 MT/s with a peak bandwidth of PC4-21300. Registered buffering adds one clock cycle of latency to reduce electrical load on the memory controller. ECC correction protects data integrity but does not increase usable capacity. Systems must support registered ECC DDR4 to accept this module.
A single 32GB RDIMM lets administrators fill DIMM slots efficiently to reach high total memory per socket. This density supports larger virtual machine counts and reduces paging in memory-bound workloads. Capacity headroom ends when all supported slots are populated or the platform memory limit is reached.
| Brand | HP |
|---|---|
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
This module provides 32GB in a single 288-pin DDR4 RDIMM with 2Rx4 organisation. Choose it when your board has free registered DIMM slots and you need maximum capacity per slot; select a lower-capacity RDIMM only if your platform limits total memory or rank count per channel.
The module runs at 2666 MT/s with a CAS latency of 15 cycles at 1.20V, giving a peak bandwidth of PC4-21300. In practice the memory controller will operate at this speed and timing as long as the CPU and chipset support DDR4-2666 registered ECC memory.
The stick uses a 288-pin registered DDR4 interface with on-board ECC. The register adds one clock cycle of buffering, so the platform must support registered RDIMMs; speed is capped at DDR4-2666 by the SPD profile and the memory controller's maximum supported data rate.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?