NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Brute Networks
32GB DDR4-2133 ECC LRDIMM with CL15 latency and 1.2V operation for Dell-compatible server upgrades
This 32 GB DDR4-2133 ECC LRDIMM uses a 288-pin form factor and operates at 1.20 V with a CAS latency of CL15. It is built with major-brand DRAM and carries a registered 4Rx4 organisation to maximise density per slot. The module is validated as 100 percent Dell compatible under part number FHV0M.
This module suits administrators who need to increase memory capacity in Dell systems that accept DDR4-2133 LRDIMMs with a 4Rx4 layout. It is not intended for consumer desktop boards that require unbuffered non-ECC DIMMs or for platforms limited to lower-rank modules. Buyers who need higher frequencies or different rank configurations should look at other specifications.
The DIMM installs directly into registered DDR4 slots that support 1.20 V operation and 4Rx4 addressing. It frees additional DIMM slots by delivering 32 GB per module, allowing larger total capacities within the existing chassis. Ensure the server memory controller and BIOS support this rank structure before installation.
| Brand | Dell |
|---|---|
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
Yes, the module is registered with ECC and a 4Rx4 organisation, so the platform must support registered ECC DDR4 at 1.2 V.
They will run at the lowest common speed and voltage; all slots must use registered ECC DDR4, but mixing LRDIMMs with standard RDIMMs is not supported by most platforms.
Check the BIOS memory information or run a tool such as dmidecode; each module should report 32 GB, DDR4-2133, CL15 and 1.2 V.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?