Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 RDIMM with black chips, 32GB ECC registered 2Rx4

Brute Networks

Brute Networks 32GB DDR4-2933 ECC Registered RDIMM 2Rx4 1.2V Q9U18A

SKU CH-QY2P-18MTZ

32 GB DDR4-2933 ECC registered RDIMM, 2Rx4 at 1.2 V, 100 % HPE Q9U18A compatible

  • Capacity32GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32 GB capacity supports large server workloads
  • DDR4-2933 speed delivers 23400 MT/s bandwidth
  • ECC registered design protects data integrity
  • 2 V operation reduces power consumption
  • 2Rx4 dual-rank layout maximises density

32GB DDR4-2933 ECC Registered RDIMM for HPE servers

This 32GB DDR4-2933 ECC Registered RDIMM is built for HPE server platforms that require registered memory with error correction. The module operates at 1.2V and uses a 2Rx4 organisation with major-brand DRAM chips. It targets administrators upgrading or repairing compatible HPE systems where Q9U18A is the qualified part number.

288-pin DDR4 installation matches keyed server slots

The 288-pin DDR4 form factor aligns with keyed server DIMM sockets, so the module seats in one direction only. Registered buffering adds a clock cycle, which the memory controller must support; mixing registered and unbuffered DIMMs will prevent the system from posting. Identical modules ship together to avoid rank or timing mismatches across channels.

DDR4-2933 speed and registered design set

The PC4-23400 rating caps data transfer at 2933 MT/s, and the registered buffer introduces one cycle of latency that unbuffered platforms cannot accommodate. ECC function relies on the memory controller generating and checking parity, so non-ECC boards will ignore the extra bits. Voltage is fixed at 1.20V, and the 2Rx4 density requires a chipset that can address dual-rank modules.

Kohokohdat

  • 32 GB capacity supports large server workloads
  • DDR4-2933 speed delivers 23400 MT/s bandwidth
  • ECC registered design protects data integrity
  • 2 V operation reduces power consumption
  • 2Rx4 dual-rank layout maximises density

Tekniset tiedot

BrandHPE
Capacity32GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset

Kysymyksiä tästä tuotteesta

How can I confirm the module is running at DDR4-2933 with ECC after installation?

Check the BIOS or UEFI memory information screen; it should report 2933 MT/s speed, 1.20 V operation, and ECC enabled for each 32 GB DIMM.

What ships with the module and what must I source separately?

The package contains the single 288-pin 32 GB RDIMM; any additional DIMMs, CPU coolers or server rails are not included.

When should I choose this 32 GB 2Rx4 registered ECC version over other capacities?

Select this module when your server requires registered ECC DDR4-2933 memory in 32 GB increments and the motherboard supports 2Rx4 organisation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.