Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular circuit board with gold edge connectors and black memory chips

Brute Networks

Brute Networks 32GB DDR4-2933 PC4-23400 1Rx4 ECC Registered RDIMM P38446-B21

SKU CH-6QJV-TYXHY

32GB DDR4-2933 ECC registered RDIMM with 1Rx4 organisation, 1.20V operation and 288-pin form factor for HPE-compatible servers

  • Capacity32GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32GB capacity supports demanding server workloads
  • DDR4-2933 speed delivers 23400 MT/s data rates
  • ECC registered design protects data integrity
  • 20V operation reduces power consumption
  • 288-pin RDIMM fits standard DDR4 server slots

32GB DDR4 RDIMM for HPE servers

This 32GB DDR4-2933 registered DIMM is built for HPE servers that require ECC error correction and registered buffering. It suits administrators expanding memory in compatible HPE platforms where the OEM part number P38446-B21 is specified. The module operates at 1.20V and uses a 288-pin DDR4 form factor. Buyers needing non-ECC or unbuffered memory for workstations cannot use this module.

Registered ECC with 1Rx4 organisation

The single specification that determines fit is the 1Rx4 registered ECC configuration running at PC4-23400 speed. Only systems qualified for this exact rank, voltage and buffering scheme will accept the module without POST errors. The major-brand chipset (Samsung, SK Hynix or Micron) matches the OEM source. Systems requiring a different rank structure or voltage will not boot with this DIMM.

Standard 288-pin installation.

Installation follows the usual 288-pin DDR4 keyed slot; press down until the latches click. The common mistake is mixing 1Rx4 modules with other ranks in the same channel, which causes the memory controller to halt training. Always populate identical ranks per channel and verify the server memory-configuration guide for the correct slot population order.

Kohokohdat

  • 32GB capacity supports demanding server workloads
  • DDR4-2933 speed delivers 23400 MT/s data rates
  • ECC registered design protects data integrity
  • 20V operation reduces power consumption
  • 288-pin RDIMM fits standard DDR4 server slots

Tekniset tiedot

BrandHPE
Capacity32GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset

Kysymyksiä tästä tuotteesta

What does the 2933 MT/s rating mean when the module is installed in a server?

The module runs at up to 2933 MT/s, delivering PC4-23400 bandwidth, provided the processor and motherboard support that data rate.

How does the registered DDR4 interface affect usable speed and capacity?

The registered design adds a clock cycle of buffering, allowing larger memory configurations while operating at the standard 1.20 V DDR4 voltage.

What physical slot and clearance does this 288-pin RDIMM require?

It fits a standard 288-pin DDR4 DIMM socket; the registered form factor matches regular RDIMM height for server chassis clearance.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.