BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277195BTC
Varastossa
Brute Networks
Brute Networks 46W0792-BN 8GB DDR4-2133 PC4-17000 CL15 2Rx8 1.2V Registered RDIMM server RAM
8GB DDR4 registered ECC DIMM running at 2133 MHz with CL15 latency and 1.2V operation
- Capacity8GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 8GB capacity expands server memory headroom
- DDR4-2133 speed delivers 17000 MT/s data rate
- Registered ECC design protects data integrity
- 2V operation reduces power draw
- 288-pin RDIMM fits compatible IBM systems
8GB DDR4-2133 Registered ECC Module
This 8GB DDR4-2133 registered RDIMM delivers error-correcting memory for IBM compatible servers. The module operates at PC4-17000 speed with CL15 latency and 1.2V voltage. It uses a 2Rx8 organisation on a 288-pin form factor. Designed for administrators maintaining or expanding existing DDR4 server infrastructure.
Thermals and Power at Standard Speed
The DDR4 module runs at the standard 1.20V, keeping power draw low during typical server workloads. Registered buffering reduces electrical load on the memory controller, which helps system thermals remain stable. No active cooling is required on the DIMM itself. ECC operation adds negligible overhead in normal use.
Behaviour Under Sustained Load
Under continuous load the registered design maintains signal integrity across all ranks. ECC corrects single-bit errors on the fly, preventing data corruption during long compute jobs. Major-brand DRAM chips from Samsung, SK Hynix or Micron provide consistent timing at 2133 MT/s. The module is validated for 100% compatibility with the target IBM platforms.
Kohokohdat
- 8GB capacity expands server memory headroom
- DDR4-2133 speed delivers 17000 MT/s data rate
- Registered ECC design protects data integrity
- 2V operation reduces power draw
- 288-pin RDIMM fits compatible IBM systems
Tekniset tiedot
| Brand | IBM |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
Kysymyksiä tästä tuotteesta
How do I install the 288-pin DDR4 RDIMM and what step do people often miss?
Align the notch with the slot key, press down evenly until both side clips click, and verify the motherboard registers the full 8 GB at DDR4-2133 CL15 in BIOS before closing the chassis.
What maintenance or replacement will the registered ECC module need over its service life?
No routine maintenance is required; if a correctable error count rises or the module fails, replace it with another 2Rx8 PC4-17000 stick to keep matched ranks.
What limit appears first when the RDIMM runs sustained workloads at 1.20 V?
The CL15 latency at DDR4-2133 sets the throughput ceiling, and the registered buffer adds one cycle, so sustained bandwidth tops out at the rated PC4-17000 speed.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 $
0.00279774BTC
Varastossa
