Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Brute Networks

Brute Networks 64GB DDR4-2933 2Rx4 ECC RDIMM P00930-S21

SKU CH-H69S-18P1S

64GB DDR4-2933 ECC registered server DIMM with 2Rx4 organisation, 100% HPE compatible

  • Capacity64GB
  • Rank2Rx4
  • ChipsetMajor Brand Chipset
  • 64 GB capacity supports memory-intensive server workloads
  • DDR4-2933 speed delivers high-throughput data processing
  • 2Rx4 dual-rank organisation maximises module density
  • ECC registered design protects data integrity in critical applications
  • 100 % HPE compatible for validated system integration

HPE-compatible 64 GB DDR4-2933 RDIMM

This Brute Networks module delivers 64 GB of DDR4-2933 ECC registered memory in a 2Rx4 configuration. It matches HPE part number P00930-S21 and is built for server platforms that require registered DIMMs with error correction. The module operates at PC4-23400 speed and carries a lifetime warranty from the supplier.

Suited for HPE server upgrades needing registered

Administrators expanding memory in compatible HPE systems will find this module a direct fit. It is not for workstations or desktops that accept only unbuffered non-ECC DIMMs. Buyers who need lower capacities, different ranks or non-registered memory should look at other parts.

Standard RDIMM installation in compatible slots

Installation follows the usual server DIMM procedure: power down, open the chassis, align the notch and press firmly until the latches engage. The main issues arise when the module is placed in a system that does not support registered ECC DDR4 or when population rules for the specific platform are not followed.

Kohokohdat

  • 64 GB capacity supports memory-intensive server workloads
  • DDR4-2933 speed delivers high-throughput data processing
  • 2Rx4 dual-rank organisation maximises module density
  • ECC registered design protects data integrity in critical applications
  • 100 % HPE compatible for validated system integration

Tekniset tiedot

BrandHPE
Capacity64GB
Rank2Rx4
ChipsetMajor Brand Chipset

Kysymyksiä tästä tuotteesta

Does my server need DDR4 slots that accept ECC registered RDIMMs to use this 64GB module?

Yes, this is a PC4-23400 DDR4-2933 2Rx4 ECC registered RDIMM, so the platform must support registered ECC DDR4 memory.

Can I mix this 64GB 2Rx4 stick with smaller single-rank DDR4-2933 ECC RDIMMs already in the system?

Mixing ranks is often allowed, but population rules vary by server model; consult the platform memory guide for supported 2Rx4 and 1Rx4 combinations.

How can I verify the module runs at 2933 MT/s with ECC active after installation?

Check the BIOS memory information or OS tools such as dmidecode — they should report 2933 MT/s, 64GB capacity, ECC enabled and registered type.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.