Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular DDR4 RDIMM module with black memory chips and gold contacts

Brute Networks

Brute Networks 8GB DDR4-2133 ECC RDIMM 1Rx4 1.2V CL15 288-pin

SKU CH-NY83-JSNET

8GB DDR4-2133 ECC registered server memory with CL15 latency and 1.2V operation for HP-compatible systems

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • ECC protection guards data integrity with registered buffering
  • DDR4-2133 speed at CL15 latency accelerates server workloads
  • 2V operation cuts power draw per module
  • 1Rx4 rank layout fits dense memory configurations
  • Matches HP 816445-B21 spec for drop-in compatibility

HP-compatible server module

This 8 GB DDR4-2133 ECC registered DIMM is built for HP servers that require PC4-17000 memory with a 1Rx4 organisation. It suits administrators who need to expand capacity in existing rack or tower systems without replacing the platform. The module uses major-brand DRAM from Samsung, SK Hynix or Micron and is validated to meet the original equipment specification. It is intended for environments where registered error-correcting memory is mandatory.

Third-party validation and warranty

Brute Networks confirms the module is 100 per cent compatible with HP part number 816445-B21 and guarantees that the original service contract remains intact. A lifetime warranty covers the DIMM for as long as it remains in service. No additional software, cables or brackets are included because the component installs directly into standard 288-pin DDR4 slots. The only change to the deployment is the increased memory capacity.

CL15 latency at 1.20 V

The single decisive specification is the CAS latency of CL15 at the JEDEC-standard 1.20 V operating voltage. Systems that require a different latency or voltage will not operate correctly with this module. Buyers who need lower latency, higher frequency or unbuffered memory must select a different part.

Kohokohdat

  • ECC protection guards data integrity with registered buffering
  • DDR4-2133 speed at CL15 latency accelerates server workloads
  • 2V operation cuts power draw per module
  • 1Rx4 rank layout fits dense memory configurations
  • Matches HP 816445-B21 spec for drop-in compatibility

Tekniset tiedot

BrandHP
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset

Kysymyksiä tästä tuotteesta

Will the 1Rx4 registered ECC module need any firmware updates or reconfiguration when I add more DIMMs later?

The module is 100 % HP compatible and meets OEM specifications, so it installs without firmware changes; just populate the remaining slots following the server's population rules.

What is the first limit reached when the DIMM runs continuously at DDR4-2133 CL15?

The registered ECC design and 1.20 V operation keep signal integrity and thermal output within JEDEC limits, so the memory controller's maximum supported capacity is reached before the module itself becomes a bottleneck.

How much heat and power does an 8 GB 1.2 V DDR4-2133 RDIMM produce under all-day load?

At 1.2 V the module draws only a few watts, and the registered buffer spreads electrical load, so heat stays low enough for standard server airflow without extra cooling.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.