Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 RDIMM module with black chips

Brute Networks

Brute Networks 8GB DDR4-2400 1Rx8 Registered RDIMM 370-ACNQ

SKU CH-SRNP-311VS

8GB registered DDR4 RDIMM running at 2400 MHz with CL15 latency and 1.2 V operation

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • 8GB DDR4-2400 capacity expands server workloads
  • Registered ECC design protects data integrity
  • 20V low voltage reduces power draw
  • 288-pin RDIMM fits Dell 370-ACNQ slots
  • Major-brand chips ensure OEM-level reliability

Dell-compatible 8 GB DDR4-2400 RDIMM

This 8 GB registered DIMM runs at DDR4-2400 with CL15 latency and 1.2 V operation. It uses a 288-pin 1Rx8 layout and includes ECC for data integrity. The module is built with major-brand chips and validated for Dell systems carrying part number 370-ACNQ. It targets administrators who need to expand memory capacity in compatible PowerEdge servers.

Upgrade from lower-capacity or slower DDR4 RDIMMs

Replacing smaller registered modules with this 8 GB stick increases the memory ceiling for virtualisation hosts and database workloads. The jump is worth it when the platform supports DDR4-2400 registered ECC and the application set is limited by installed capacity rather than raw bandwidth. Systems already populated with faster DDR4 speeds will clock this module down to the lowest common rate.

Limited to DDR4-2400 registered ECC platforms

The DDR4 interface caps transfer rate at 2400 MT/s and requires a registered memory controller with ECC support. Unbuffered consumer boards and platforms that only accept UDIMMs cannot use this module. Mixed populations with different ranks or speeds will force the channel to the slowest common denominator, reducing peak throughput.

Kohokohdat

  • 8GB DDR4-2400 capacity expands server workloads
  • Registered ECC design protects data integrity
  • 20V low voltage reduces power draw
  • 288-pin RDIMM fits Dell 370-ACNQ slots
  • Major-brand chips ensure OEM-level reliability

Tekniset tiedot

BrandDell
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset

Kysymyksiä tästä tuotteesta

Will the 288-pin DDR4 RDIMM fit my server's memory slots?

This module uses the standard 288-pin DDR4 RDIMM form factor. It fits any server slot designed for registered DDR4 memory at 1.2V.

What is the correct installation sequence for this 1Rx8 registered module?

Install modules in the order specified by your server's manual — typically populating the lowest-numbered slots first — and ensure the notch aligns with the key before pressing evenly until the clips lock.

When should I plan to replace this 8GB DDR4-2400 module?

DDR4 RDIMMs have no scheduled replacement interval. Replace only if diagnostics report correctable ECC errors rising above threshold or if a module fails completely.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.