Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 server RDIMM with black chips and gold contacts

Brute Networks

Brute Networks 8GB DDR4-2400 ECC Registered RDIMM 1Rx4 CL15 1.2V

SKU CH-BJ6H-7SSFS

8GB DDR4-2400 ECC registered RDIMM with CL15 latency and 1.2V operation for HP-compatible servers

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • ECC protection prevents data errors in critical workloads
  • Registered buffering reduces electrical load for stable server operation
  • DDR4-2400 speed with CL15 latency delivers responsive performance
  • 2V operation lowers power draw and heat output
  • HP 843311-B21 equivalent ensures drop-in compatibility

8GB DDR4-2400 ECC RDIMM for Servers

This 8GB DDR4-2400 ECC Registered RDIMM is built for HP-compatible server platforms that require 288-pin PC4-19200 memory. It targets administrators who need to expand capacity in existing infrastructure without replacing hardware. The module uses major-brand DRAM chips and meets OEM specifications to maintain service contracts. It suits workloads that depend on error correction and registered signalling for stability.

Thermals Noise and Power Draw

Operating at 1.20V standard DDR4 voltage, the module runs within normal thermal limits for registered server DIMMs. The 1Rx4 organisation helps keep power draw predictable under sustained load. No active cooling is required beyond standard server airflow. Acoustic impact is negligible as the component has no moving parts.

Upgrade Path and When It Matters

This module replaces lower-capacity or non-ECC DDR4 DIMMs in slots that support 288-pin PC4-19200 registered memory. The jump is worth it when virtualisation density or database caching is limited by current RAM capacity. It is not for systems that require unbuffered UDIMMs, LRDIMM slots, or speeds beyond DDR4-2400. Buyers needing larger single-module capacities or higher frequencies must look elsewhere.

Kohokohdat

  • ECC protection prevents data errors in critical workloads
  • Registered buffering reduces electrical load for stable server operation
  • DDR4-2400 speed with CL15 latency delivers responsive performance
  • 2V operation lowers power draw and heat output
  • HP 843311-B21 equivalent ensures drop-in compatibility

Tekniset tiedot

BrandHP
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset

Kysymyksiä tästä tuotteesta

How do I install this 288-pin DDR4 RDIMM, and what step do people often get wrong?

Align the notch on the module with the key in the server DIMM slot, press straight down until both retention clips click shut, and ensure the registered module is seated in a slot that supports registered memory; the common error is forcing it into a UDIMM-only slot or stopping before the clips fully engage.

What maintenance or replacement will this 8GB ECC registered module need later?

No routine maintenance is required; if a correctable ECC error count rises over time, the module should be replaced, otherwise it runs for the server's lifespan without service.

What limit appears first when this CL15 1.2V module runs under sustained load?

The CAS latency of 15 cycles at DDR4-2400 sets the timing floor, so sustained throughput is bound by that latency before voltage or thermal limits become factors.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.