Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 RDIMM with black chips and silver contacts

Brute Networks

Brute Networks Cisco Compatible 32GB DDR4-2133 2Rx4 1.2V ECC Registered RDIMM server RAM

SKU CH-V3N4-0A6T1

Adds 32 GB of DDR4-2133 ECC registered memory to compatible Cisco servers using 288-pin 2Rx4 modules at 1.2 V

  • Capacity32GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32GB capacity expands server memory for heavier workloads
  • DDR4-2133 speed delivers 17000 MT/s data rate
  • ECC registered design protects data integrity in critical tasks
  • 2V operation reduces power draw per module
  • 100% Cisco UCS-MR-1X322RU compatible for guaranteed fit

Server memory upgrade

This 32GB DDR4 registered DIMM is built for Cisco-compatible servers that require ECC error correction and 1.2V operation. It targets administrators who need to expand capacity in existing 288-pin slots without replacing the platform. The module uses major-brand DRAM chips and matches the UCS-MR-1X322RU specification. Buyers who need non-ECC unbuffered memory or a different voltage cannot use this part.

Thermals and power draw

Operating at 1.20V, the module draws minimal power during typical server workloads and generates little additional heat inside the chassis. Registered buffering reduces electrical load on the memory controller, helping keep overall system power stable. No active cooling is required beyond standard server airflow. The design meets OEM thermal expectations for dense memory configurations.

Sustained load behaviour

Under continuous utilisation the ECC circuitry corrects single-bit errors on the fly, preventing data corruption during long-running virtualisation or database tasks. The 2Rx4 organisation maintains consistent bandwidth at 2133MHz without throttling. Compatibility is guaranteed for systems that accept this specification, preserving existing service contracts. Modules lacking registered ECC support will not deliver the same reliability.

Kohokohdat

  • 32GB capacity expands server memory for heavier workloads
  • DDR4-2133 speed delivers 17000 MT/s data rate
  • ECC registered design protects data integrity in critical tasks
  • 2V operation reduces power draw per module
  • 100% Cisco UCS-MR-1X322RU compatible for guaranteed fit

Tekniset tiedot

BrandCisco
Capacity32GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset

Kysymyksiä tästä tuotteesta

How do I install this 288-pin DDR4 RDIMM and what step is often missed?

Align the notch with the slot key, press firmly until both side clips click, then verify the module height clears the CPU cooler; the step often missed is reseating if the system does not POST on first boot.

What maintenance or replacement will this 32GB ECC registered module need later?

No routine maintenance is required; if a correctable ECC error count rises over time, replace the module, otherwise it typically lasts the server's service life.

What limit appears first under sustained load with this 1.2V 2133MHz kit?

The memory controller's maximum supported capacity per channel is reached before thermal or voltage limits, capping total installed gigabytes.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.