Brute Networks
Brute Networks HP Compatible 16GB DDR4-2133 CL15 1.2V Registered RDIMM 2Rx4 288-Pin
16 GB registered DDR4 RDIMM with ECC, CL15 latency and 1.2 V operation for HP servers
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 16GB DDR4-2133 capacity expands server memory headroom
- CL15 latency at 1.20V reduces power draw per module
- Registered 2Rx4 design maintains signal integrity on dense platforms
- Major-brand Samsung, SK Hynix or Micron ICs match OEM quality
- Lifetime guarantee protects the upgrade for the system's service life
HP Compatible 16GB DDR4-2133 RDIMM
This 16GB registered DDR4 module operates at 2133 MT/s with CL15 latency and 1.20V power. It uses a 2Rx4 organisation and 288-pin form factor with ECC for data integrity. The part matches HP 753221-S21 and is built with major-brand DRAM chips.
For servers needing HP-qualified registered ECC
Suits administrators upgrading or repairing compatible HP systems that require registered DDR4 RDIMMs at this speed and rank configuration. Not for workstations or desktops that accept only unbuffered UDIMMs. Not for platforms requiring a different voltage, pin count, or memory generation.
Registered DDR4 RDIMM with ECC
The registered buffer and ECC capability determine whether this module functions in a given server; systems expecting unbuffered non-ECC UDIMMs will not POST with this part installed. Verify the platform requires registered ECC DDR4 before purchase.
Kohokohdat
- 16GB DDR4-2133 capacity expands server memory headroom
- CL15 latency at 1.20V reduces power draw per module
- Registered 2Rx4 design maintains signal integrity on dense platforms
- Major-brand Samsung, SK Hynix or Micron ICs match OEM quality
- Lifetime guarantee protects the upgrade for the system's service life
Tekniset tiedot
| Brand | HP |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
Kysymyksiä tästä tuotteesta
Does my server need DDR4 288-pin registered DIMM slots to use this 16GB module?
Yes, this is a 288-pin DDR4 registered RDIMM that requires a server platform supporting registered ECC memory at 1.2V.
Can I mix this CL15 2133MHz stick with slower DDR4 modules already installed?
The system will run all modules at the speed of the slowest installed kit, so this 2133MHz module will down-clock to match older DDR4.
How can I verify the module is running at PC4-17000 with ECC active after installation?
Check the BIOS memory information or OS tools such as dmidecode to confirm 2133MHz speed, CL15 timing, 1.2V voltage and ECC enabled status.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.



