Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 RDIMM module with black chips

Brute Networks

Brute Networks P00918-B21 HP Compatible 8GB DDR4-2933 1Rx8 ECC Registered RDIMM

SKU CH-G1S9-BQ99W

8GB DDR4-2933 ECC registered RDIMM adds reliable capacity to compatible HP servers

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR3 2933 (PC3 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • HP-compatible 8 GB DDR4 module expands server capacity
  • DDR4-2933 speed with 1.20 V operation reduces power draw
  • ECC registered 1Rx8 design protects data integrity
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-level reliability
  • Third-party module guaranteed 100 % compatible with HP P00918-B21

HP Compatible 8GB DDR4 RDIMM

This 8GB DDR4-2933 registered DIMM is built to match HP part number P00918-B21 and carries a 1Rx8 ECC configuration. It targets administrators who need to expand memory in supported HP servers without replacing the original modules.

DDR4-2933 registered ECC limits

The module runs at 2933 MT/s with a PC4-23400 data rate and requires a platform that supports registered ECC DDR4 at this speed. Systems limited to lower DDR4 speeds or unbuffered memory will not accept it, and the registered buffer adds one cycle of latency compared with unregistered DIMMs.

Major-brand chips and 288-pin build

Each stick uses Samsung, SK Hynix or Micron components and is tested to meet OEM specifications for HP platforms. The 288-pin DDR4 form factor fits standard server DIMM slots, and the 1.2V operating voltage matches the DDR4 server norm for straightforward installation.

Kohokohdat

  • HP-compatible 8 GB DDR4 module expands server capacity
  • DDR4-2933 speed with 1.20 V operation reduces power draw
  • ECC registered 1Rx8 design protects data integrity
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-level reliability
  • Third-party module guaranteed 100 % compatible with HP P00918-B21

Tekniset tiedot

BrandHP
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR3 2933 (PC3 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset

Kysymyksiä tästä tuotteesta

Should I choose the 8GB 1Rx8 RDIMM or a different capacity for my HP server?

This module provides 8GB in a single 1Rx8 registered DIMM; select the quantity that matches your server's maximum supported capacity and available 288-pin slots.

What does the DDR4-2933 (PC4-23400) speed rating mean once the module is installed?

The module runs at up to 2933 MT/s with a peak transfer rate of 23400 MB/s, delivering the bandwidth your CPU can address when the memory controller is configured for that speed.

Is the 288-pin DDR4 RDIMM interface compatible with my HP ProLiant and what does it cap in practice?

The 288-pin registered DDR4 interface fits standard HP ProLiant slots; actual throughput is capped by the server's memory controller and the 1.20V operating voltage of this module.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.