Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular 288-pin DDR4 memory module with black chips and gold contacts

Brute Networks

Brute Networks P00922-B21 HP Compatible 16GB DDR4-2933 ECC Registered RDIMM 2Rx8 1.2V

SKU CH-30YP-X75H1

Adds 16 GB of DDR4 ECC registered memory at 2933 MT/s to compatible HP servers

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR3 2933 (PC3 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB ECC registered memory protects data integrity
  • DDR4-2933 speed feeds CPU cores without bottleneck
  • 2 V operation lowers server power draw
  • 2Rx8 dual-rank layout maximises capacity per slot
  • 100 % HP compatible keeps service contracts valid

Brute Networks 16GB DDR4-2933 ECC RDIMM

This Brute Networks module is a 16GB DDR4-2933 ECC registered RDIMM built to HP P00922-B21 specifications. It uses major-brand chips on a 288-pin DDR4 SDRAM PCB and runs at 1.2V. The 2Rx8 organisation provides error-correcting registered operation for server platforms that require registered memory.

Suits servers needing HP P00922-B21 compatible

Administrators expanding HP Gen10 or compatible platforms that call for PC4-23400 registered DIMMs will find this module a direct match. Systems that require unbuffered UDIMMs, load-reduced LRDIMMs, or a different voltage cannot use this part. Buyers needing capacities other than 16GB should select a different module.

2Rx8 registered ECC at DDR4-2933 decides fit

The single specification that determines compatibility is the 2Rx8 registered ECC organisation at DDR4-2933 (PC4-23400). The memory controller must support registered operation with this rank configuration and speed. Verify the platform qualified vendor list for P00922-B21 before installation.

Kohokohdat

  • 16 GB ECC registered memory protects data integrity
  • DDR4-2933 speed feeds CPU cores without bottleneck
  • 2 V operation lowers server power draw
  • 2Rx8 dual-rank layout maximises capacity per slot
  • 100 % HP compatible keeps service contracts valid

Tekniset tiedot

BrandHP
Capacity16GB
Type288-Pin DDR4 SDRAM
SpeedDDR3 2933 (PC3 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset

Kysymyksiä tästä tuotteesta

Does this 288-pin DDR4 RDIMM require an empty slot on an HP server motherboard that supports registered ECC memory?

Yes, the module uses the standard 288-pin DDR4 form factor and registered ECC signalling, so it must be installed in a compatible HP server slot that accepts RDIMMs.

Can this 2Rx8 module be mixed with existing 1Rx4 or 2Rx4 DDR4-2933 RDIMMs in the same server?

Mixing different rank organisations is generally possible on HP platforms, but the memory controller will operate all modules at the lowest common speed and rank configuration supported by the CPU and BIOS.

How can I verify the module is recognised at 2933 MHz with ECC active after installation?

Check the BIOS memory configuration screen or run a tool such as dmidecode on Linux to confirm the reported speed shows 2933 MT/s and the ECC status reads enabled for the new DIMM.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.