Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Low-profile PCIe card with two QSFP+ ports and a metal bracket

C&N

C&N ST7288 Mellanox ConnectX-3 Dual-Port QSFP+ 40GbE Network Card

SKU CH-02P0-K89H6

Dual-port 40GbE QSFP+ card with PCIe 3.0 x8, RoCE, SR-IOV up to 127 VFs and FDR-14 InfiniBand support

  • StandardsEthernet
  • Speed10 gigabytes_per_second
  • ConnectorsEthernet
  • Interfaceethernet
  • BUSethernet
  • FeaturesDesktop
  • Dual-port 40GbE and FDR-14 InfiniBand deliver up to 56Gbps bandwidth
  • PCIe 3.0 x8 host interface with 2.0 and 1.1 compatibility
  • RDMA and RoCE support achieve latency as low as 1 microsecond
  • SR-IOV provides up to 127 virtual functions for virtualised servers
  • Low-profile form factor with 2U bracket fits dense data-centre racks

Dual-port 40GbE QSFP+ server NIC

The C&N ST7288 is a Mellanox ConnectX-3 network card built for enterprise data centres and high-performance computing clusters. It delivers two 40Gb Ethernet ports or FDR-14 InfiniBand links through a PCIe 3.0 x8 host interface, targeting workloads that demand high throughput and low latency.

PCIe 3.0 x8 bandwidth ceiling

The card plugs into a PCIe 3.0 x8 slot and remains compatible with PCIe 2.0 and 1.1, but the slot generation limits total throughput to the bandwidth of eight third-generation lanes. Each QSFP+ port runs at up to 40Gb Ethernet or 56Gbps InfiniBand, so the bus can become the bottleneck before the ports saturate.

Low-profile build with two QSFP+ cages

A low-profile bracket and 2U bracket are included, allowing the 0.254 kg card to fit in dense 1U or 2U chassis. Two QSFP+ cages accept standard MSA-compliant transceivers or direct-attach cables, so cabling choices depend on the modules you source separately. Buyers needing more than two ports or a different form factor should look elsewhere.

Kohokohdat

  • Dual-port 40GbE and FDR-14 InfiniBand deliver up to 56Gbps bandwidth
  • PCIe 3.0 x8 host interface with 2.0 and 1.1 compatibility
  • RDMA and RoCE support achieve latency as low as 1 microsecond
  • SR-IOV provides up to 127 virtual functions for virtualised servers
  • Low-profile form factor with 2U bracket fits dense data-centre racks

Tekniset tiedot

BrandC&N
ModelST7288
Part NumberST7288
StandardsEthernet
Speed10 gigabytes_per_second
ConnectorsEthernet
Interfaceethernet
BUSethernet
FeaturesDesktop
Weight0.254 kilograms

Kysymyksiä tästä tuotteesta

Should I choose the dual-port QSFP+ 40GbE version or a single-port alternative?

The dual-port QSFP+ 40GbE version provides two 40 Gigabit Ethernet ports and supports FDR-14 InfiniBand up to 56Gbps, doubling the connectivity options of a single-port card for server and storage clusters.

What does the 40GbE headline speed mean once the card is installed in a server?

Each of the two QSFP+ ports delivers up to 40Gbps Ethernet throughput with RDMA and RoCE latency as low as 1 microsecond, reducing CPU load in virtualised environments via SR-IOV with up to 127 virtual functions.

Which PCIe standard does the card use and what bandwidth does that cap in practice?

The card uses a PCIe 3.0 x8 host interface, compliant with PCIe 2.0 and 1.1, providing sufficient bandwidth for dual 40GbE ports and 56Gbps InfiniBand FDR-14 operation without host-bus bottlenecks.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.