Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

CableMAX

CableMAX CM-4S1PRS232 4S1P PCIe x1 expansion card

SKU CH-59EM-5QE8E

Adds four 16C950 UART serial ports and one IEEE1284 parallel port via a PCIe x1 slot with 250Mbytes/sec throughput

  • TypePCI Express to Serial Port Card
  • External Ports4 x Serial Ports
  • Adds four high-performance 16C950 UART serial ports for legacy device connectivity
  • Includes one IEEE1284 compliant parallel port supporting SPP/EPP/ECP modes
  • Delivers 5V or 12V power over serial connectors to simplify peripheral wiring
  • Full x1 PCI Express throughput at 250Mbytes/sec with PCIe 1.0a compliance
  • 128-byte FIFO buffers and 921.6Kbps baud rate ensure reliable high-speed data transfer

Legacy I/O expansion

The CableMAX CM-4S1PRS232 is a PCI Express x1 add-in card that adds four RS-232 serial ports and one IEEE1284 parallel port to a desktop system. It targets integrators and technicians who must connect legacy industrial equipment, point-of-sale hardware or older peripherals to modern motherboards that lack native COM and LPT headers. The card fits any standard PCIe x1 slot and operates with 5V or 3.3V signalling tolerance.

Sustained throughput

Each of the four UART channels uses a 16C950-compatible controller with 128-byte FIFO buffers per transmitter and receiver, supporting baud rates up to 921.6Kbps and automated in-band and out-of-band flow control. The PCI Express 1.0a interface delivers full x1 throughput of 250Mbytes/sec, so sustained multi-port traffic does not saturate the bus. Advanced error reporting with ECRC support helps maintain data integrity during long transfers.

Port count decides fit

The single specification that determines suitability is the combination of four serial ports plus one parallel port on a single bracket. Systems that need fewer serial channels, a different connector type or no parallel port should select an alternative card, while applications requiring more than four COM ports will need additional expansion.

Kohokohdat

  • Adds four high-performance 16C950 UART serial ports for legacy device connectivity
  • Includes one IEEE1284 compliant parallel port supporting SPP/EPP/ECP modes
  • Delivers 5V or 12V power over serial connectors to simplify peripheral wiring
  • Full x1 PCI Express throughput at 250Mbytes/sec with PCIe 1.0a compliance
  • 128-byte FIFO buffers and 921.6Kbps baud rate ensure reliable high-speed data transfer

Tekniset tiedot

ModelCM-4S1PRS232
TypePCI Express to Serial Port Card
External Ports4 x Serial Ports

Kysymyksiä tästä tuotteesta

Does the CM-4S1PRS232 run hot or draw much power when left on all day?

The card uses a single PCIe x1 slot with 250Mbytes/sec throughput and operates at 3.3V or 5V tolerance, so heat and power draw stay minimal during continuous use.

What must my PC already have for this card to work?

You need a free PCI Express x1 slot compliant with revision 1.0a and an operating system that supports Plug-and-Play serial and parallel port drivers.

Will the CM-4S1PRS232 work alongside my older RS-232C and parallel devices?

Yes — the four 16C950 UART channels are fully compatible with 16C550-type devices, support baud rates up to 921.6Kbps, and the parallel port meets IEEE1284 SPP/EPP/ECP standards.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.